github-actions[bot] commented on PR #8035: URL: https://github.com/apache/texera/pull/8035#issuecomment-5434734971
<!-- texera-benchmarks-comment --> ## ✅ No material benchmark regressions detected 🟢 4 better · 🔴 0 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `97e3585` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/33042012256) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🟢 | bs=10 sw=10 sl=64 | 596 | 0.364 | 16,353/20,842/20,842 us | 🟢 -25.2% / 🔴 +50.6% | | 🟢 | bs=100 sw=10 sl=64 | 1,168 | 0.713 | 82,501/114,693/114,693 us | 🟢 -6.7% / 🔴 +22.4% | | ⚪ | bs=1000 sw=10 sl=64 | 1,428 | 0.872 | 698,561/739,776/739,776 us | ⚪ within ±5% / 🟢 -21.1% | <details><summary>Baseline details</summary> Latest main `97e3585` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 596 tuples/sec | 572 tuples/sec | 894.86 tuples/sec | +4.2% | -33.4% | | bs=10 sw=10 sl=64 | MB/s | 0.364 MB/s | 0.349 MB/s | 0.546 MB/s | +4.3% | -33.4% | | bs=10 sw=10 sl=64 | p50 | 16,353 us | 16,349 us | 11,139 us | +0.0% | +46.8% | | bs=10 sw=10 sl=64 | p95 | 20,842 us | 27,879 us | 13,843 us | -25.2% | +50.6% | | bs=10 sw=10 sl=64 | p99 | 20,842 us | 27,879 us | 16,839 us | -25.2% | +23.8% | | bs=100 sw=10 sl=64 | throughput | 1,168 tuples/sec | 1,123 tuples/sec | 1,166 tuples/sec | +4.0% | +0.2% | | bs=100 sw=10 sl=64 | MB/s | 0.713 MB/s | 0.686 MB/s | 0.711 MB/s | +3.9% | +0.2% | | bs=100 sw=10 sl=64 | p50 | 82,501 us | 83,988 us | 87,509 us | -1.8% | -5.7% | | bs=100 sw=10 sl=64 | p95 | 114,693 us | 122,984 us | 93,675 us | -6.7% | +22.4% | | bs=100 sw=10 sl=64 | p99 | 114,693 us | 122,984 us | 102,153 us | -6.7% | +12.3% | | bs=1000 sw=10 sl=64 | throughput | 1,428 tuples/sec | 1,404 tuples/sec | 1,198 tuples/sec | +1.7% | +19.2% | | bs=1000 sw=10 sl=64 | MB/s | 0.872 MB/s | 0.857 MB/s | 0.731 MB/s | +1.8% | +19.2% | | bs=1000 sw=10 sl=64 | p50 | 698,561 us | 716,187 us | 859,766 us | -2.5% | -18.7% | | bs=1000 sw=10 sl=64 | p95 | 739,776 us | 775,973 us | 902,897 us | -4.7% | -18.1% | | bs=1000 sw=10 sl=64 | p99 | 739,776 us | 775,973 us | 937,957 us | -4.7% | -21.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,335.65,200,128000,596,0.364,16353.27,20841.91,20841.91 1,100,10,64,20,1712.61,2000,1280000,1168,0.713,82501.04,114692.88,114692.88 2,1000,10,64,20,14004.26,20000,12800000,1428,0.872,698561.07,739775.69,739775.69 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
