github-actions[bot] commented on PR #8282: URL: https://github.com/apache/texera/pull/8282#issuecomment-5475974578
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 6 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `50321e4` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/33373952548) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 361 | 0.22 | 25,783/34,589/34,589 us | 🔴 -10.2% / 🔴 +133.9% | | 🔴 | bs=100 sw=10 sl=64 | 777 | 0.474 | 126,830/145,317/145,317 us | 🔴 +5.9% / 🔴 +44.0% | | ⚪ | bs=1000 sw=10 sl=64 | 903 | 0.551 | 1,103,060/1,164,365/1,164,365 us | ⚪ within ±5% / 🔴 +20.3% | <details><summary>Baseline details</summary> Latest main `50321e4` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 361 tuples/sec | 402 tuples/sec | 844.57 tuples/sec | -10.2% | -57.3% | | bs=10 sw=10 sl=64 | MB/s | 0.22 MB/s | 0.245 MB/s | 0.515 MB/s | -10.2% | -57.3% | | bs=10 sw=10 sl=64 | p50 | 25,783 us | 23,564 us | 11,837 us | +9.4% | +117.8% | | bs=10 sw=10 sl=64 | p95 | 34,589 us | 35,302 us | 14,788 us | -2.0% | +133.9% | | bs=10 sw=10 sl=64 | p99 | 34,589 us | 35,302 us | 17,651 us | -2.0% | +96.0% | | bs=100 sw=10 sl=64 | throughput | 777 tuples/sec | 811 tuples/sec | 1,084 tuples/sec | -4.2% | -28.3% | | bs=100 sw=10 sl=64 | MB/s | 0.474 MB/s | 0.495 MB/s | 0.662 MB/s | -4.2% | -28.4% | | bs=100 sw=10 sl=64 | p50 | 126,830 us | 119,828 us | 94,505 us | +5.8% | +34.2% | | bs=100 sw=10 sl=64 | p95 | 145,317 us | 137,228 us | 100,941 us | +5.9% | +44.0% | | bs=100 sw=10 sl=64 | p99 | 145,317 us | 137,228 us | 108,642 us | +5.9% | +33.8% | | bs=1000 sw=10 sl=64 | throughput | 903 tuples/sec | 907 tuples/sec | 1,119 tuples/sec | -0.4% | -19.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.551 MB/s | 0.554 MB/s | 0.683 MB/s | -0.5% | -19.4% | | bs=1000 sw=10 sl=64 | p50 | 1,103,060 us | 1,094,485 us | 924,404 us | +0.8% | +19.3% | | bs=1000 sw=10 sl=64 | p95 | 1,164,365 us | 1,200,823 us | 967,785 us | -3.0% | +20.3% | | bs=1000 sw=10 sl=64 | p99 | 1,164,365 us | 1,200,823 us | 995,630 us | -3.0% | +16.9% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,554.01,200,128000,361,0.220,25783.19,34589.25,34589.25 1,100,10,64,20,2572.99,2000,1280000,777,0.474,126830.19,145317.10,145317.10 2,1000,10,64,20,22139.98,20000,12800000,903,0.551,1103059.50,1164364.74,1164364.74 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
