github-actions[bot] commented on PR #8655: URL: https://github.com/apache/texera/pull/8655#issuecomment-5806786974
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 3 worse · ⚪ 12 noise (<±5%) · 0 without baseline > Compared against main `d5e1943` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/35949896893) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 434 | 0.265 | 21,874/31,253/31,253 us | 🔴 +20.1% / 🔴 +100.9% | | ⚪ | bs=100 sw=10 sl=64 | 939 | 0.573 | 104,666/150,206/150,206 us | ⚪ within ±5% / 🔴 +40.3% | | ⚪ | bs=1000 sw=10 sl=64 | 1,072 | 0.654 | 934,353/1,001,064/1,001,064 us | ⚪ within ±5% / ⚪ within ±5% | <details><summary>Baseline details</summary> Latest main `d5e1943` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 434 tuples/sec | 474 tuples/sec | 783.2 tuples/sec | -8.4% | -44.6% | | bs=10 sw=10 sl=64 | MB/s | 0.265 MB/s | 0.29 MB/s | 0.478 MB/s | -8.6% | -44.6% | | bs=10 sw=10 sl=64 | p50 | 21,874 us | 18,219 us | 12,557 us | +20.1% | +74.2% | | bs=10 sw=10 sl=64 | p95 | 31,253 us | 31,188 us | 15,560 us | +0.2% | +100.9% | | bs=10 sw=10 sl=64 | p99 | 31,253 us | 31,188 us | 18,704 us | +0.2% | +67.1% | | bs=100 sw=10 sl=64 | throughput | 939 tuples/sec | 917 tuples/sec | 1,006 tuples/sec | +2.4% | -6.6% | | bs=100 sw=10 sl=64 | MB/s | 0.573 MB/s | 0.56 MB/s | 0.614 MB/s | +2.3% | -6.7% | | bs=100 sw=10 sl=64 | p50 | 104,666 us | 106,315 us | 100,334 us | -1.6% | +4.3% | | bs=100 sw=10 sl=64 | p95 | 150,206 us | 151,565 us | 107,096 us | -0.9% | +40.3% | | bs=100 sw=10 sl=64 | p99 | 150,206 us | 151,565 us | 121,049 us | -0.9% | +24.1% | | bs=1000 sw=10 sl=64 | throughput | 1,072 tuples/sec | 1,106 tuples/sec | 1,040 tuples/sec | -3.1% | +3.1% | | bs=1000 sw=10 sl=64 | MB/s | 0.654 MB/s | 0.675 MB/s | 0.635 MB/s | -3.1% | +3.0% | | bs=1000 sw=10 sl=64 | p50 | 934,353 us | 908,616 us | 978,709 us | +2.8% | -4.5% | | bs=1000 sw=10 sl=64 | p95 | 1,001,064 us | 970,475 us | 1,016,905 us | +3.2% | -1.6% | | bs=1000 sw=10 sl=64 | p99 | 1,001,064 us | 970,475 us | 1,047,732 us | +3.2% | -4.5% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,460.86,200,128000,434,0.265,21873.80,31253.05,31253.05 1,100,10,64,20,2130.53,2000,1280000,939,0.573,104665.96,150205.65,150205.65 2,1000,10,64,20,18651.12,20000,12800000,1072,0.654,934352.97,1001063.58,1001063.58 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
