github-actions[bot] commented on PR #9011: URL: https://github.com/apache/texera/pull/9011#issuecomment-6204609067
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 4 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `cdaaf2a` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/38824641590) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 399 | 0.243 | 23,363/33,157/33,157 us | 🔴 -6.5% / 🔴 +127.0% | | 🔴 | bs=100 sw=10 sl=64 | 799 | 0.488 | 124,262/144,175/144,175 us | 🔴 +7.0% / 🔴 +43.9% | | ⚪ | bs=1000 sw=10 sl=64 | 924 | 0.564 | 1,082,915/1,128,565/1,128,565 us | ⚪ within ±5% / 🔴 -24.6% | <details><summary>Baseline details</summary> Latest main `cdaaf2a` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 399 tuples/sec | 426 tuples/sec | 912.36 tuples/sec | -6.3% | -56.3% | | bs=10 sw=10 sl=64 | MB/s | 0.243 MB/s | 0.26 MB/s | 0.557 MB/s | -6.5% | -56.4% | | bs=10 sw=10 sl=64 | p50 | 23,363 us | 23,573 us | 11,391 us | -0.9% | +105.1% | | bs=10 sw=10 sl=64 | p95 | 33,157 us | 34,211 us | 14,608 us | -3.1% | +127.0% | | bs=10 sw=10 sl=64 | p99 | 33,157 us | 34,211 us | 17,250 us | -3.1% | +92.2% | | bs=100 sw=10 sl=64 | throughput | 799 tuples/sec | 824 tuples/sec | 1,161 tuples/sec | -3.0% | -31.2% | | bs=100 sw=10 sl=64 | MB/s | 0.488 MB/s | 0.503 MB/s | 0.709 MB/s | -3.0% | -31.1% | | bs=100 sw=10 sl=64 | p50 | 124,262 us | 121,685 us | 91,471 us | +2.1% | +35.8% | | bs=100 sw=10 sl=64 | p95 | 144,175 us | 134,687 us | 100,192 us | +7.0% | +43.9% | | bs=100 sw=10 sl=64 | p99 | 144,175 us | 134,687 us | 119,565 us | +7.0% | +20.6% | | bs=1000 sw=10 sl=64 | throughput | 924 tuples/sec | 925 tuples/sec | 1,226 tuples/sec | -0.1% | -24.6% | | bs=1000 sw=10 sl=64 | MB/s | 0.564 MB/s | 0.565 MB/s | 0.748 MB/s | -0.2% | -24.6% | | bs=1000 sw=10 sl=64 | p50 | 1,082,915 us | 1,075,515 us | 887,282 us | +0.7% | +22.0% | | bs=1000 sw=10 sl=64 | p95 | 1,128,565 us | 1,124,698 us | 924,352 us | +0.3% | +22.1% | | bs=1000 sw=10 sl=64 | p99 | 1,128,565 us | 1,124,698 us | 951,858 us | +0.3% | +18.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,501.50,200,128000,399,0.243,23363.41,33157.45,33157.45 1,100,10,64,20,2502.01,2000,1280000,799,0.488,124262.39,144174.58,144174.58 2,1000,10,64,20,21635.76,20000,12800000,924,0.564,1082915.24,1128564.69,1128564.69 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
