--- In [EMAIL PROTECTED], [EMAIL PROTECTED] wrote: > > I am trying to program my 9303 to drive a PolySergio, v-tails, and flaps and a Himax outrunner. The Rx is a Shadow 3 with the deault pin setup. I would like to operate the flaps with the LH stick and the throttle with the LH side rotary lever. I have the V-tails ok but I can't get the rest even close. > > Does anyone out there have the solution ? > > Regards and thanks in advance, > > Dave Corven.
Dave, If you are trying to do something unusual, I like to use the free programmable mixes. There are a number of ways to do what you are wanting. Many electric guys have been running throttle on a switch, but I have not yet started doing that. I don't have your exact setup, but here is what I have and what I like: Allegro Lite RES with a speed 400. JR 783 transmitter 4! Channel Hitec Electron receiver! Rudder and elevator are on right stick (channel 2 and 3) (just like one would expect). Throttle is on channel 1. I have the spoiler operating on the "rudder channel" (channel 4). But the rudder of course does not operate the spoiler. I have used one of the free mixes to disable the rudder stick from moving the spoiler Throttle is on the throttle stick, but only activates the throttle when 3 position switch is down or neutral. In 3 position switch up, the throttle stick operates the spoiler and spoiler to elevator mix is active. I can send you programming details if you are interested. Ryan RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
