Has anyone flowen the Gp spirit 100 arf? Have you changed the cg location from its original location to a diffrent one? If you have where did you move it too? I noticed my spirit has a lot of nose wieght and is sluggish in response to rudder and elevator inputs. Any help in correcting this would be very helpfull. Right now I have my square battery pack in the nose. Two full size servos in the forward servo locations. And the reciever is up against the forward fuselage former in the tow hook area. So I have moved everything forward as far as I could. Then I mixed the shot in the bag with clay and packed that into the nose. The plane balances just forward of the recommended 4 1/2 inches from the front leading edge. Why did i use clay to hold the shot? This way I could remove the wieght later on if i need to correct the cg location. Then I could make it more perminent later. The plane has been high start launched only it flies level with nuetral elevator input. But again it is very sluggish on response to rudder and elevator movements. thanks for your help Scott Harter
RCSE-List facilities provided by Model Airplane News. Send "subscribe" and "unsubscribe" requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
