Signed-off-by: Francisco Jerez <[email protected]> --- man/nouveau.man | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++-- 1 files changed, 50 insertions(+), 2 deletions(-)
diff --git a/man/nouveau.man b/man/nouveau.man index 5c4e4ae..f591459 100644 --- a/man/nouveau.man +++ b/man/nouveau.man @@ -84,13 +84,61 @@ tells to the driver to scale lower resolutions up to the flat panel's native resolution. Default: on. .TP .BI "Option \*qScalingMode\*q \*q" string \*q -Only for the randr-1.2 driver, this allows to set the DFP scaling mode. +This allows to set the DFP scaling mode. The options are "fullscreen", "aspect", "noscale" and "panel". Default: "aspect". .TP .BI "Option \*qShadowFB\*q \*q" boolean \*q Enable or disable use of the shadow framebuffer layer. Default: off. + +.SH OUTPUT CONFIGURATION +Multihead configuration is done through the RandR1.2 interface (see +__xconfigfile__(__filemansuffix__) and xrandr(__appmansuffix__) for +details). The following output properties may be available (depending +on what chip model is being used. You can use xrandr(__appmansuffix__) +to get a list of the allowed properties and ranges): +.SS DVI-I and TV outputs +.TP +.B subconnector +reports what kind of connector was detected to be plugged in. +It can be something like +.BR DVI-D " or " DVI-A " for " DVI-I " outputs, " +.RB "and something like " Composite ", " SVIDEO ", " Component " or " SCART +.RB "for " TV " outputs." +.TP +.B select subconnector +allows the user to override the autodetected +.B subconnector +setting. +.SS DVI-I, DVI-D and LVDS outputs +.TP +.B dithering, scaling mode +Analogous to the +.BR FPDither " and " FPScale +config file options explained above. +.SS TV outputs +.TP +.B mode +selects which TV norm will be used. Note that the TV output has to be +turned off before this can be modified. If you want a system-wide +default for this, use the +.B tv_norm +option of the TV encoder driver you're using (If no external TV +encoder is being used, that's the \*qnouveau\*q kernel module). +.TP +.B overscan +controls how much of the screen margins will be left unused and black. +.TP +.B scale +Only used for TV encoders with fixed rescaler units that require +different video modes for different scaling ratios. A bigger +.B scale +value usually means a bigger output image. Note that the TV output has +to be turned off before modifying this, just like the +.B mode +property. + .SH "SEE ALSO" -__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__) +__xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__), xrandr(__appmansuffix__) .SH AUTHORS Authors include: David McKay, Jarno Paananen, Chas Inman, Dave Schmenk, Mark Vojkovich -- 1.6.3.3 _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
