Renato Caldas <[email protected]> writes: > Hello, > > Since I've updated to F13 I keep getting blank screens at "cold" boot > with this card: > 00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce > 6150] (rev a2) > > When I say "cold" boot I mean the first couple of times I turn on my > computer in the morning. After a couple of reboots I get plymouth to > show up, and then X11. This never happened with F12. > > After comparing the logs (--- bad, +++ good), I found these: > > (...) > input: ImPS/2 Generic Wheel Mouse as > /devices/platform/i8042/serio1/input/input4 > -[drm] nouveau 0000:00:05.0: Load detected on output B > -[drm] nouveau 0000:00:05.0: allocated 1280x1024 fb: 0x49000, bo > ffff880034ea0cd8 > +[drm] nouveau 0000:00:05.0: allocated 1280x1024 fb: 0x49000, bo > ffff880034ea8cd8 > fbcon: nouveaufb (fb0) is primary device > [drm] nouveau 0000:00:05.0: Setting dpms mode 0 on vga encoder (output 0) > [drm] nouveau 0000:00:05.0: Output VGA-1 is running on CRTC 0 using output B > -[drm] nouveau 0000:00:05.0: Setting dpms mode 0 on TV encoder (output 2) > -[drm] nouveau 0000:00:05.0: Output TV-1 is running on CRTC 1 using output B > -Console: switching to colour frame buffer device 90x36 > +Console: switching to colour frame buffer device 160x64 > fb0: nouveaufb frame buffer device > (...) > [drm] nouveau 0000:00:05.0: Allocating FIFO number 1 > [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 1 > -[drm] nouveau 0000:00:05.0: Setting dpms mode 3 on TV encoder (output 2) > [drm] nouveau 0000:00:05.0: Allocating FIFO number 2 > [drm] nouveau 0000:00:05.0: nouveau_channel_alloc: initialised FIFO 2 > (...) > > Although this may seem like a hardware quirk (it may be, partially), > the fact is that I don't have a TV output, only VGA and DVI. So I > guess the driver shouldn't be looking for load on an nonexistent > output. This other log line may be relevant (or not): > Could you provide full kernel logs and the output from "lspci -vvn"?
> Apr 13 08:35:30 localhost kernel: type=1400 audit(1271144119.830:4):
> avc: denied { mmap_zero } for pid=462 comm="vbetool"
> scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023
> tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
>
> On the other hand, both CRTC's are using output B. I'm not that
> familiar with the hardware, and this may be completely wrong, but I
> assume an output can only be used by a single CRTC.
>
Yeah, that's correct.
> Cheers,
> Renato
> _______________________________________________
> Nouveau mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/nouveau
pgpCanmIMRCZY.pgp
Description: PGP signature
_______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
