Hello Francisco,
You were right - the monitor name was wrong in that section. I replaced
Monitor0 with VGA-1 and it worked just fine. Thank you a lot for your help!
Regards,
Adrian
On 06/11/2010 12:43 PM, Francisco Jerez wrote:
Hi,
Adrian Popa<[email protected]> writes:
Hello,
I've checked and i have a GeForce 4 MX 440, and i do see a TV-1 in xrandr but I
didn't manage to configure it
with xrandr.
I've looked over [2] and by using xrandr --output TV-1 --right-of VGA-1 i
managed to extend my desktop to my
TV. Also, i see the window transparency effect keeps working ;)
The problem is - I tried to configure xorg.conf but I didn't manage to add the
displays side by side (the TV
overlaps with the monitor from the top-left corner), even if they have
different resolutions. I have attached
my xorg.conf for reference. I realize I must be missing something trivial in
the configuration. Anyone care to
point it out?
Thanks,
Adrian
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "record"
Load "dri2"
Load "dri"
Load "glx"
Load "extmod"
Load "dbe"
EndSection
You probably don't need any of the last two sections.
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "VGA-1"
DisplaySize 340 270 # mm
VendorName "NEC"
ModelName "LCD72VM"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
You shouldn't need any of the options above.
EndSection
Section "Monitor"
Identifier "TV-1"
Option "RightOf" "Monitor0"
The "Monitor0" identifier is wrong, I guess you meant "VGA-1".
HorizSync 30-50
VertRefresh 60
# 720x576 @ 50Hz, 31.25kHz, itu-r bt.1358 625/50/p/1:1, RGB, YPbPr, HDMI
ModeLine "720x...@50" 27 720 732 795 864 576 581 586 625 -hsync
-vsync
# nonstandard PAL (Works with BOB deinterlace) It is 60Hz but works
well with nVIDIA PAL-B TV-OUT
# Nvidia option: Option "TVStandard" "PAL-B"
ModeLine "720x...@60" 32.7 720 744 816 912 576 577 580 597
# This modeline is 50Hz interlaced and works well with kerneldeint:
ModeLine "720x576i" 13.875 720 744 808 888 576 581 586 625 -hsync
-vsync interlace
You shouldn't need to set any timings manually.
EndSection
Section "Device"
### Available Driver options are:-
### Values:<i>: integer,<f>: float,<bool>: "True"/"False",
###<string>: "String",<freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" #<i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" #<i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" #<i>
#Option "DualHead" "True" # [<bool>]
Identifier "Card0"
Driver "nouveau"
VendorName "nVidia Corporation"
BoardName "NV18 [GeForce4 MX 440 AGP 8x]"
BusID "PCI:2:0:0"
Option "Monitor-VGA-1" "VGA-1"
Option "Monitor-TV-1" "TV-1"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
#Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
--
---
Adrian Popa
NOC Division
Network Engineer
Divizia Centrul National de Operare Retea
Departament Transport IP& Metro
Compartiment IP Core& Backbone
Phone: +40 21 400 3099
_______________________________________________
Nouveau mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/nouveau
