https://bugs.freedesktop.org/show_bug.cgi?id=31780
--- Comment #11 from Kevin Winchester <[email protected]> 2010-12-01 16:20:42 PST --- I can confirm even more soundly now that the nouveau driver is mixing up the DVI and VGA outputs of my video card. I now have one monitor hooked up to each output, using identical monitors. When the nouveau fbcon comes on at boot time, the VGA-connected monitor seems to work correctly. And then when I start X with the nouveau driver selected, the VGA-connected monitor shows a proper desktop, and the DVI-connected monitor stays blank (even though my xorg.conf specifies that both monitors should be used - which works when the nv driver is used). The way I know that something is wrong is that the xrandr utility believes that both monitors are connected and enabled, and the DVI connection should be the primary display and to the left of the VGA connection. However, my VGA-connected monitor is actually the primary, and it is on the left side of the virtual screen, instead of the right. This fits with the earlier boot log where the KMS driver seemed to be getting confused between the two outputs. Is there anything I can do to help debug this, or change the way the driver detects the outputs? -- Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
