https://bugs.freedesktop.org/show_bug.cgi?id=34220
Summary: Detects Load on output and blinks screen ~30secs
Product: xorg
Version: unspecified
Platform: Other
OS/Version: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
AssignedTo: [email protected]
ReportedBy: [email protected]
QAContact: [email protected]
Card is GeForce 7100 GS
OS is Arch latest.
Problem:
Every 30 seconds the monitor connected via VGA blinks off, and then comes back
on. dmesg output shows '[drm] nouveau 0000:01:00.0: Load detected on output A'.
The resolution is also incorrectly detected/set to '1024x768', when '1920x1080'
should be the preferred. If I add the other monitor's (DVI) preferred mode to
the VGA and then set that as the mode it works fine.
I have seen bugs 26800, and 29455 but they don't quite match my problem. I
don't want TV out and my resolutions are fine after I add the mode to the
output and select it. Turning off TV-1 doesn't fix the problem.
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
Nouveau mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/nouveau
