>>>>>>>> I just switched from nvidia to nouveau and I get the following in >>>>>>>> Xorg.0.log: >>>>>>>> >>>>>>>> (WW) NOUVEAU(0): Option "Rotate" is not used >>>>>>>> >>>>>>>> I have the following in xorg.conf because I've rotated the LCD screen >>>>>>>> to change its orientation: >>>>>>>> >>>>>>>> Option "Rotate" "CCW" >>>>>>>> >>>>>>>> Can this be done with nouveau? BTW, I can't say for sure that nouveau >>>>>>>> isn't rotating the screen image because the workstation is remote. >>>>>>> Sure it can, nouveau is a randr 1.2 driver - so adding 'Option "Rotate" >>>>>>> "Left"' to the monitor section of your xorg.conf will work instead. >>>>>>> >>>>>>> Ben. >>>>>> >>>>>> Thanks Ben, that worked great. >>>>>> >>>>>> - Grant >>>>> >>>>> I spoke too soon. I don't get the warning in Xorg.0.log anymore, but >>>>> someone tried to use the system and told me the screen was not rotated >>>>> as it should be. I tried both of these in xorg.conf with the same >>>>> result: >>>>> >>>>> Section "Monitor" >>>>> Identifier "mymonitor" >>>>> Option "Rotate" "Left" >>>>> EndSection >>>>> >>>>> Section "Monitor" >>>>> Identifier "mymonitor" >>>>> Option "Rotate" "CCW" >>>>> EndSection >>>>> >>>>> Any ideas? >>>>> >>>>> - Grant >>>> >>>> You might need to add something like: >>>> >>>> Option "DVI-I-1" "mymonitor" >>>> >>>> To your device section, ofcource choose the right connector/output. >>>> Grep the xorg log for output and you should be able to find it. >>> >>> I added it like this: >>> >>> Section "Device" >>> Identifier "mydevice" >>> Driver "nouveau" >>> Option "VGA-1" "mymonitor" >>> EndSection >>> >>> But I get this from Xorg.0.log: >>> >>> Option "VGA-1" is not used >>> >>> I also tried VGA-I-1 to match your example with the same result. I >>> have this in Xorg.0.log so I think VGA-1 is correct: >>> >>> (II) NOUVEAU(0): Output VGA-1 has no monitor section >>> ... >>> (II) NOUVEAU(0): Output VGA-1 connected >>> >>> Is my syntax off somehow? >>> >>> - Grant >> >> My mistake, it should "monitor-VGA-1" instead. > > I think that's it! I get: > > (II) NOUVEAU(0): Output VGA-1 using monitor section mymonitor > > I'll know for sure soon when someone tries to log into that system. > I'll report back.
It works, thanks again! - Grant _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
