NV11/17/1F/18 come after NV10/15/16/1A. In order to facilitate using
numerical comparisons, split up the two sets into different card types.

This change should be a no-op except that the relevant cards will see
NV11 printed instead of NV10 for the family.

Signed-off-by: Ilia Mirkin <[email protected]>
---

Only tested on a NV18, but it seems to work. That means that I got at
least most of the relevant NV_10 checks. Did grepping to find them all.

 drivers/gpu/drm/nouveau/core/engine/device/base.c  | 11 +++++++++--
 drivers/gpu/drm/nouveau/core/include/core/device.h |  1 +
 drivers/gpu/drm/nouveau/core/subdev/bios/pll.c     |  1 +
 drivers/gpu/drm/nouveau/dispnv04/hw.c              |  2 +-
 drivers/gpu/drm/nouveau/nouveau_abi16.c            |  1 +
 drivers/gpu/drm/nouveau/nouveau_bo.c               |  3 ++-
 drivers/gpu/drm/nouveau/nouveau_connector.c        |  7 ++++---
 7 files changed, 19 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/core/engine/device/base.c 
b/drivers/gpu/drm/nouveau/core/engine/device/base.c
index 4c72571..652cc3b 100644
--- a/drivers/gpu/drm/nouveau/core/engine/device/base.c
+++ b/drivers/gpu/drm/nouveau/core/engine/device/base.c
@@ -161,7 +161,13 @@ nouveau_devobj_ctor(struct nouveau_object *parent,
                if ((boot0 & 0x0f000000) > 0) {
                        device->chipset = (boot0 & 0xff00000) >> 20;
                        switch (device->chipset & 0xf0) {
-                       case 0x10: device->card_type = NV_10; break;
+                       case 0x10: {
+                               if (0x461 & (1 << (device->chipset & 0xf)))
+                                       device->card_type = NV_10;
+                               else
+                                       device->card_type = NV_11;
+                               break;
+                       }
                        case 0x20: device->card_type = NV_20; break;
                        case 0x30: device->card_type = NV_30; break;
                        case 0x40:
@@ -188,7 +194,8 @@ nouveau_devobj_ctor(struct nouveau_object *parent,
 
                switch (device->card_type) {
                case NV_04: ret = nv04_identify(device); break;
-               case NV_10: ret = nv10_identify(device); break;
+               case NV_10:
+               case NV_11: ret = nv10_identify(device); break;
                case NV_20: ret = nv20_identify(device); break;
                case NV_30: ret = nv30_identify(device); break;
                case NV_40: ret = nv40_identify(device); break;
diff --git a/drivers/gpu/drm/nouveau/core/include/core/device.h 
b/drivers/gpu/drm/nouveau/core/include/core/device.h
index 99b6600..8601dea 100644
--- a/drivers/gpu/drm/nouveau/core/include/core/device.h
+++ b/drivers/gpu/drm/nouveau/core/include/core/device.h
@@ -72,6 +72,7 @@ struct nouveau_device {
        enum {
                NV_04    = 0x04,
                NV_10    = 0x10,
+               NV_11    = 0x11,
                NV_20    = 0x20,
                NV_30    = 0x30,
                NV_40    = 0x40,
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c 
b/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c
index f835501..1f76de5 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/pll.c
@@ -114,6 +114,7 @@ pll_map(struct nouveau_bios *bios)
        switch (nv_device(bios)->card_type) {
        case NV_04:
        case NV_10:
+       case NV_11:
        case NV_20:
        case NV_30:
                return nv04_pll_mapping;
diff --git a/drivers/gpu/drm/nouveau/dispnv04/hw.c 
b/drivers/gpu/drm/nouveau/dispnv04/hw.c
index 973056b..ffd2641 100644
--- a/drivers/gpu/drm/nouveau/dispnv04/hw.c
+++ b/drivers/gpu/drm/nouveau/dispnv04/hw.c
@@ -740,7 +740,7 @@ nv_load_state_ext(struct drm_device *dev, int head,
        }
        /* NV11 and NV20 stop at 0x52. */
        if (nv_gf4_disp_arch(dev)) {
-               if (nv_device(drm->device)->card_type == NV_10) {
+               if (nv_device(drm->device)->card_type < NV_20) {
                        /* Not waiting for vertical retrace before modifying
                           CRE_53/CRE_54 causes lockups. */
                        nouveau_timer_wait_eq(ptimer, 650000000, 
NV_PRMCIO_INP0__COLOR, 0x8, 0x8);
diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c 
b/drivers/gpu/drm/nouveau/nouveau_abi16.c
index 8f467e7..028e370 100644
--- a/drivers/gpu/drm/nouveau/nouveau_abi16.c
+++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c
@@ -87,6 +87,7 @@ nouveau_abi16_swclass(struct nouveau_drm *drm)
        case NV_04:
                return 0x006e;
        case NV_10:
+       case NV_11:
        case NV_20:
        case NV_30:
        case NV_40:
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c 
b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 191145d..c735467 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -269,7 +269,8 @@ set_placement_range(struct nouveau_bo *nvbo, uint32_t type)
        struct nouveau_fb *pfb = nouveau_fb(drm->device);
        u32 vram_pages = pfb->ram->size >> PAGE_SHIFT;
 
-       if (nv_device(drm->device)->card_type == NV_10 &&
+       if ((nv_device(drm->device)->card_type == NV_10 ||
+            nv_device(drm->device)->card_type == NV_11) &&
            nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM) &&
            nvbo->bo.mem.num_pages < vram_pages / 4) {
                /*
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c 
b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 4da776f..a6dedfa 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -212,9 +212,10 @@ nouveau_connector_set_encoder(struct drm_connector 
*connector,
        } else {
                connector->doublescan_allowed = true;
                if (nv_device(drm->device)->card_type == NV_20 ||
-                  (nv_device(drm->device)->card_type == NV_10 &&
-                   (dev->pci_device & 0x0ff0) != 0x0100 &&
-                   (dev->pci_device & 0x0ff0) != 0x0150))
+                   ((nv_device(drm->device)->card_type == NV_10 ||
+                     nv_device(drm->device)->card_type == NV_11) &&
+                    (dev->pci_device & 0x0ff0) != 0x0100 &&
+                    (dev->pci_device & 0x0ff0) != 0x0150))
                        /* HW is broken */
                        connector->interlace_allowed = false;
                else
-- 
1.8.1.5

_______________________________________________
Nouveau mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/nouveau

Reply via email to