On 04/10/13 01:54, Christoph Rudorff wrote: > Am Donnerstag, den 03.10.2013, 23:50 +0100 schrieb Emil Velikov: >> I'm not entirely sure this is correct. One needs to save and disable >> accleration before suspending the fb. Please try the following >> >> - if (state == 0) >> + if (state == 1) >> nouveau_fbcon_save_disable_accel(dev); >> fb_set_suspend(drm->fbcon->helper.fbdev, state); >> - if (state == 1) >> + if (state == 0) >> nouveau_fbcon_restore_accel(dev); >> console_unlock(); >> >> Cheers, >> Emil > > Hi! > > That was my first try! I guessed the same but I got exactly one trap > message on resume. > Hi Chris,
Just got around to playing with s2disk on my laptop(nv96) and AFAICS it seems to be OK without either patch. Can you provide some more context regarding the issue ? * What hardware are you running * Which kernel are you having problems with * Can you resume from s2disk correctly if you never start X * Do you have the problem with s2ram * dmesg without and with either patch It might be useful if you can open a bug report and attach the information in there [1] Cheers, Emil [1] http://nouveau.freedesktop.org/wiki/Bugs/ > So it's about first put the bucket and then open the water tap. > > ;) > > chris > > ps: just found these macros for the state in fb.h: > > FBINFO_STATE_RUNNING = 0 > FBINFO_STATE_SUSPENDED = 1 > > _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
