Hi, As mentioned recently in the nouveau IRC room recently,
When running a Powermac 11.2, (G5 Quad) with a Quadro FX4500 (NV47), previous kernels had no issue extracting the DCB block / GPU BIOS from the OpenFirmware device tree via the FCODE ROM. Last vanilla kernel that i have compiled seemed to work fine (vanilla 3.18.16).
However, when compiling a newer vanilla kernel, (vanilla 4.1.2), nouveau seems to have an issue reading the DCB block / GPU BIOS from the OpenFirmware device tree.
As instructed, i have attached a dmesg.log along with a dump of the NVDA,BMP fimage out of the following folder: /sys/firmware/devicetree/base/pci@0,f0000000/NVDA,Parent@0/
Also, i have passed the following nouveau module options as instructed: options nouveau config="NvMSI=0,debug=debug,VBIOS=trace" Please let me know if there is any more info required. Thanks for your help! Best Regards, Peter
[ 0.000000] Allocated 4096 bytes for 4 pacas at c00000000ffff000 [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12 [ 0.000000] Found initrd at 0xc000000001500000:0xc000000001c57000 [ 0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 Dual Core [ 0.000000] DART IOMMU initialized for U4 type chipset [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] Starting Linux PPC64 #1 SMP Sun Jul 12 11:01:34 AEST 2015 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x400000000 [ 0.000000] cpu_features = 0x0804806318100448 [ 0.000000] possible = 0x1fffffef18500649 [ 0.000000] always = 0x0000000018100040 [ 0.000000] cpu_user_features = 0xdc080000 0x00000000 [ 0.000000] mmu_features = 0x0c000001 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] htab_address = 0xc000000470000000 [ 0.000000] htab_hash_mask = 0x1fffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.2-powerpc64 (root@powermac-g5-quad) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Sun Jul 12 11:01:34 AEST 2015 [ 0.000000] Found U4-PCIE PCI host bridge. Firmware bus number: 0->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000bfffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp. [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=1710, gen1=1711 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x480000000, Total RAM: 0x400000000 [ 0.000000] Memory hole size: 2048MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000047fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000047fffffff] [ 0.000000] On node 0 totalpages: 4194304 [ 0.000000] free_area_init_node: node 0, pgdat c000000000715200, node_mem_map c0000004603baf80 [ 0.000000] DMA zone: 64512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4194304 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 21 pages/cpu @c000000460200000 s46360 r0 d39656 u262144 [ 0.000000] pcpu-alloc: s46360 r0 d39656 u262144 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4129792 [ 0.000000] Kernel command line: root=UUID=3e9f281b-e012-4b4f-8c36-6fe559e02786 ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 16199008K/16777216K available (5428K kernel code, 936K rwdata, 1260K rodata, 316K init, 478K bss, 578208K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 124 sources [ 0.000000] mpic: Setting up HT PICs workarounds for U3/U4 [ 0.000000] mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000 [ 0.000000] mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs [ 0.000000] time_init: decrementer frequency = 33.333333 MHz [ 0.000000] time_init: processor frequency = 2500.000000 MHz [ 0.000002] clocksource timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns [ 0.000006] clocksource: timebase mult[1e000005] shift[24] registered [ 0.000009] clockevent: decrementer mult[8888887] shift[32] cpu[0] [ 0.000059] Console: colour dummy device 80x25 [ 0.000063] console [tty0] enabled [ 0.000068] bootconsole [udbg0] disabled [ 0.000074] pid_max: default: 32768 minimum: 301 [ 0.000105] Security Framework initialized [ 0.000113] AppArmor: AppArmor disabled by boot time parameter [ 0.000128] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000133] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000686] Initializing cgroup subsys blkio [ 0.000696] Initializing cgroup subsys devices [ 0.000702] Initializing cgroup subsys freezer [ 0.000708] Initializing cgroup subsys net_cls [ 0.000714] Initializing cgroup subsys perf_event [ 0.000858] PowerMac SMP probe found 4 cpus [ 0.000945] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000 [ 0.000950] channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1 [ 0.000991] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000 [ 0.000996] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.001000] channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0 [ 0.001061] SMU i2c /smu@0,0/smu-i2c-control@0 [ 0.001065] channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b [ 0.001069] channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e [ 0.001083] Processor timebase sync using platform function [ 0.001087] mpic: requesting IPIs... [ 0.001120] PPC970/FX/MP performance monitor hardware support registered [ 0.005024] Brought up 4 CPUs [ 0.005378] devtmpfs: initialized [ 0.007371] device-tree: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1" [ 0.009254] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.009694] NET: Registered protocol family 16 [ 0.013998] cpuidle: using governor ladder [ 0.020011] cpuidle: using governor menu [ 0.020413] PCI: Probing PCI hardware [ 0.020503] PCI host bridge to bus 0000:00 [ 0.020512] pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address [0x0000-0x7fffff]) [ 0.020522] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.020530] pci_bus 0000:00: root bus resource [mem 0x90000000-0xbfffffff] [ 0.020537] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.020547] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.020578] pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400 [ 0.020609] PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0xbfffffff] [ 0.020642] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold [ 0.053546] IOMMU table initialized, virtual merging enabled [ 0.053616] pci 0000:0a:00.0: [10de:009d] type 00 class 0x030000 [ 0.053632] pci 0000:0a:00.0: reg 0x10: [mem 0x92000000-0x92ffffff] [ 0.053645] pci 0000:0a:00.0: reg 0x14: [mem 0xa0000000-0xbfffffff 64bit pref] [ 0.053658] pci 0000:0a:00.0: reg 0x1c: [mem 0x91000000-0x91ffffff 64bit] [ 0.053667] pci 0000:0a:00.0: reg 0x24: [io 0x10000-0x1007f] [ 0.053676] pci 0000:0a:00.0: reg 0x30: [mem 0x90000000-0x9001ffff pref] [ 0.053766] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.053782] pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.053793] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.053797] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xbfffffff] [ 0.053804] pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 0.053832] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a [ 0.053894] PCI host bridge to bus 0001:00 [ 0.053901] pci_bus 0001:00: root bus resource [io 0x811000-0xc10fff] (bus address [0x0000-0x3fffff]) [ 0.053912] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff] [ 0.053919] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff] [ 0.053926] pci_bus 0001:00: root bus resource [mem 0xc0000000-0xefffffff] [ 0.053933] pci_bus 0001:00: root bus resource [bus 00-ef] [ 0.053941] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff [ 0.053956] pci 0001:00:00.0: [106b:0074] type 00 class 0x060000 [ 0.054025] pci 0001:00:01.0: [1166:0130] type 01 class 0x060400 [ 0.054112] pci 0001:00:02.0: [1166:0130] type 01 class 0x060400 [ 0.054201] pci 0001:00:03.0: [1166:0132] type 01 class 0x060400 [ 0.054283] pci 0001:00:04.0: [1166:0132] type 01 class 0x060400 [ 0.054363] pci 0001:00:05.0: [1166:0132] type 01 class 0x060400 [ 0.054448] pci 0001:00:06.0: [1166:0132] type 01 class 0x060400 [ 0.054531] pci 0001:00:07.0: [106b:0053] type 01 class 0x060400 [ 0.054628] pci 0001:00:08.0: [106b:0054] type 01 class 0x060400 [ 0.054719] pci 0001:00:09.0: [106b:0055] type 01 class 0x060400 [ 0.054879] pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.054941] pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000 [ 0.054955] pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit] [ 0.054964] pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit] [ 0.055003] pci 0001:05:04.0: PME# supported from D3hot D3cold [ 0.055061] pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000 [ 0.055076] pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit] [ 0.055085] pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit] [ 0.055123] pci 0001:05:04.1: PME# supported from D3hot D3cold [ 0.055188] pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.055199] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.055258] pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.055309] pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.055359] pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.055408] pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.055472] pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.055484] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.055489] pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.055539] pci 0001:01:01.0: [14e4:4318] type 00 class 0x028000 [ 0.055550] pci 0001:01:01.0: reg 0x10: [mem 0x80084000-0x80085fff] [ 0.055640] pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000 [ 0.055650] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.055744] pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310 [ 0.055758] pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff] [ 0.055807] pci 0001:01:0b.0: supports D1 D2 [ 0.055810] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055868] pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310 [ 0.055882] pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.055931] pci 0001:01:0b.1: supports D1 D2 [ 0.055934] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055993] pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320 [ 0.056006] pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff] [ 0.056056] pci 0001:01:0b.2: supports D1 D2 [ 0.056059] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.056117] pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.056129] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.056134] pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.056224] pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f [ 0.056234] pci 0001:03:0c.0: reg 0x10: [io 0x811000-0x811007] [ 0.056242] pci 0001:03:0c.0: reg 0x14: [io 0x811000-0x811003] [ 0.056249] pci 0001:03:0c.0: reg 0x18: [io 0x811000-0x811007] [ 0.056257] pci 0001:03:0c.0: reg 0x1c: [io 0x811000-0x811003] [ 0.056264] pci 0001:03:0c.0: reg 0x20: [io 0x811000-0x81100f] [ 0.056272] pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff] [ 0.056343] pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000 [ 0.056353] pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff] [ 0.056437] pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010 [ 0.056449] pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff] [ 0.056494] pci 0001:03:0e.0: supports D1 D2 [ 0.056497] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.056551] pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.056563] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.056568] pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref] [ 0.056619] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09 [ 0.056711] PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff] [ 0.056726] pci 0000:00:0b.0: BAR 9: assigned [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.056737] pci 0000:0a:00.0: BAR 5: assigned [io 0x10000-0x1007f] [ 0.056747] pci 0000:00:0b.0: PCI bridge to [bus 0a] [ 0.056754] pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff] [ 0.056764] pci 0000:00:0b.0: bridge window [mem 0x90000000-0xbfffffff] [ 0.056772] pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.056786] pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff] [ 0.056789] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.056792] pci_bus 0000:00: resource 6 [mem 0x90000000-0xbfffffff] [ 0.056795] pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff] [ 0.056798] pci_bus 0000:0a: resource 1 [mem 0x90000000-0xbfffffff] [ 0.056801] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref] [ 0.056838] pci 0001:00:01.0: PCI bridge to [bus 04] [ 0.056848] pci 0001:00:02.0: PCI bridge to [bus 05] [ 0.056855] pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff] [ 0.056864] pci 0001:00:03.0: PCI bridge to [bus 06] [ 0.056874] pci 0001:00:04.0: PCI bridge to [bus 07] [ 0.056883] pci 0001:00:05.0: PCI bridge to [bus 08] [ 0.056892] pci 0001:00:06.0: PCI bridge to [bus 09] [ 0.056901] pci 0001:00:07.0: PCI bridge to [bus 02] [ 0.056909] pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff] [ 0.056918] pci 0001:00:08.0: PCI bridge to [bus 01] [ 0.056926] pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff] [ 0.056935] pci 0001:00:09.0: PCI bridge to [bus 03] [ 0.056943] pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff] [ 0.056953] pci_bus 0001:00: resource 4 [io 0x811000-0xc10fff] [ 0.056956] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff] [ 0.056959] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff] [ 0.056961] pci_bus 0001:00: resource 7 [mem 0xc0000000-0xefffffff] [ 0.056964] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff] [ 0.056968] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff] [ 0.056971] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff] [ 0.056974] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff] [ 0.056976] PCI: Probing PCI hardware done [ 0.061988] vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none [ 0.062026] vgaarb: loaded [ 0.062031] vgaarb: bridge control possible 0000:0a:00.0 [ 0.062153] SCSI subsystem initialized [ 0.062186] pps_core: LinuxPPS API ver. 1 registered [ 0.062192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> [ 0.062473] Switched to clocksource timebase [ 0.064385] b43-pci-bridge 0001:01:01.0: enabling device (0004 -> 0006) [ 0.071497] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 [ 0.071508] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) [ 0.071514] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) [ 0.071520] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) [ 0.071525] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) [ 0.090531] ssb: Sonics Silicon Backplane found on PCI device 0001:01:01.0 [ 0.090593] NET: Registered protocol family 2 [ 0.090868] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.091432] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.092653] TCP: Hash tables configured (established 131072 bind 65536) [ 0.092720] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.092864] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.093110] NET: Registered protocol family 1 [ 0.093151] PCI: CLS mismatch (32 != 64), using 128 bytes [ 0.093167] pci 0001:00:03.0: Found enabled HT MSI Mapping [ 0.093180] pci 0001:00:04.0: Found enabled HT MSI Mapping [ 0.093191] pci 0001:00:05.0: Found enabled HT MSI Mapping [ 0.093203] pci 0001:00:06.0: Found enabled HT MSI Mapping [ 0.093231] pci 0001:01:0b.0: enabling device (0000 -> 0002) [ 0.143508] pci 0001:01:0b.1: enabling device (0000 -> 0002) [ 0.194487] pci 0001:01:0b.2: enabling device (0004 -> 0006) [ 0.194596] Unpacking initramfs... [ 0.381233] Freeing initrd memory: 7516K (c000000001500000 - c000000001c57000) [ 0.381687] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.381738] Initialise system trusted keyring [ 0.381772] audit: initializing netlink subsys (disabled) [ 0.381804] audit: type=2000 audit(1436735021.379:1): initialized [ 0.382113] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 0.385340] VFS: Disk quotas dquot_6.6.0 [ 0.385409] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.386088] alg: No test for stdrng (krng) [ 0.386120] bounce: pool size: 64 pages [ 0.386187] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.386199] io scheduler noop registered [ 0.386206] io scheduler deadline registered [ 0.386267] io scheduler cfq registered (default) [ 0.386560] Using unsupported 1920x1200 NVDA,Display-A at a0020000, depth=8, pitch=2048 [ 0.426429] Console: switching to colour frame buffer device 240x75 [ 0.466006] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0 [ 0.466503] MacIO PCI driver attached to Shasta chipset [ 0.467200] mousedev: PS/2 mouse device common for all mice [ 0.518499] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 0.529482] Registering G5 CPU frequency driver [ 0.529601] Frequency method: SCOM, Voltage method: GPIO [ 0.529739] Low: 1250 Mhz, High: 2500 Mhz, Cur: 2500 MHz [ 0.530216] NET: Registered protocol family 10 [ 0.530683] mip6: Mobile IPv6 [ 0.530766] NET: Registered protocol family 17 [ 0.530897] Key type dns_resolver registered [ 0.531202] Loading compiled-in X.509 certificates [ 0.531339] registered taskstats version 1 [ 0.581472] rtc-generic rtc-generic: setting system clock to 2015-07-12 21:03:42 UTC (1436735022) [ 0.582108] Freeing unused kernel memory: 316K (c00000000068f000 - c0000000006de000) [ 0.622443] systemd-udevd[71]: starting version 215 [ 0.624337] random: systemd-udevd urandom read with 7 bits of entropy available [ 0.638246] PTP clock support registered [ 0.644019] tg3.c:v3.137 (May 11, 2014) [ 0.645817] libata version 3.00 loaded. [ 0.646173] sata_svw 0001:03:0c.0: version 2.3 [ 0.646247] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu [ 0.650922] scsi host0: sata_svw [ 0.652914] usbcore: registered new interface driver usbfs [ 0.653108] usbcore: registered new interface driver hub [ 0.653298] usbcore: registered new device driver usb [ 0.653700] scsi host1: sata_svw [ 0.654295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.654781] ehci-pci: EHCI PCI platform driver [ 0.655013] ehci-pci 0001:01:0b.2: EHCI Host Controller [ 0.655164] ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1 [ 0.655424] ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000 [ 0.655431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.655692] tg3 0001:05:04.0: Using 32-bit DMA via iommu [ 0.656145] tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:68:67:70 [ 0.656330] scsi host2: sata_svw [ 0.656571] tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 0.656830] tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.657044] tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit] [ 0.658388] scsi host3: sata_svw [ 0.658578] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18 [ 0.658775] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18 [ 0.658970] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18 [ 0.659165] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18 [ 0.659425] pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006) [ 0.661514] ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00 [ 0.661781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.661960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.662152] usb usb1: Product: EHCI Host Controller [ 0.662280] usb usb1: Manufacturer: Linux 4.1.2-powerpc64 ehci_hcd [ 0.662443] usb usb1: SerialNumber: 0001:01:0b.2 [ 0.665734] tg3 0001:05:04.1: Using 32-bit DMA via iommu [ 0.666129] tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:68:67:71 [ 0.666132] tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 0.666134] tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.666136] tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit] [ 0.676087] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3 [ 0.676392] scsi host4: pata_macio [ 0.676453] ata5: PATA max UDMA/133 irq 38 [ 0.677555] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002) [ 0.728546] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 0.760994] hub 1-0:1.0: USB hub found [ 0.770126] hub 1-0:1.0: 5 ports detected [ 0.779664] ohci-pci: OHCI PCI platform driver [ 0.788755] ohci-pci 0001:01:0b.0: OHCI PCI host controller [ 0.797847] ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2 [ 0.806883] ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000 [ 0.846939] ata5.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66 [ 0.884796] ata5.00: configured for UDMA/66 [ 0.886377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.886380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.886381] usb usb2: Product: OHCI PCI host controller [ 0.886383] usb usb2: Manufacturer: Linux 4.1.2-powerpc64 ohci_hcd [ 0.886385] usb usb2: SerialNumber: 0001:01:0b.0 [ 0.898598] hub 2-0:1.0: USB hub found [ 0.898616] hub 2-0:1.0: 3 ports detected [ 0.898772] ohci-pci 0001:01:0b.1: OHCI PCI host controller [ 0.898778] ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3 [ 0.898803] ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000 [ 0.965517] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.975700] ata1.00: ATA-8: WDC WD3200AAKS-75L9A0, 02.03E02, max UDMA/133 [ 0.975702] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.977353] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.977355] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.977357] usb usb3: Product: OHCI PCI host controller [ 0.977359] usb usb3: Manufacturer: Linux 4.1.2-powerpc64 ohci_hcd [ 0.977360] usb usb3: SerialNumber: 0001:01:0b.1 [ 0.977534] hub 3-0:1.0: USB hub found [ 0.977545] hub 3-0:1.0: 2 ports detected [ 0.992738] ata1.00: configured for UDMA/133 [ 0.992912] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 3E02 PQ: 0 ANSI: 5 [ 1.229707] firewire_core 0001:03:0e.0: created device fw0: GUID 001451fffe357de8, S800 [ 1.245088] firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5 [ 1.323557] ata2: SATA link down (SStatus 4 SControl 300) [ 1.398511] usb 2-2: new full-speed USB device number 2 using ohci-pci [ 1.603513] usb 2-2: New USB device found, idVendor=413c, idProduct=1003 [ 1.618804] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.634101] usb 2-2: Product: Dell USB Keyboard Hub [ 1.649351] usb 2-2: Manufacturer: Dell [ 1.672513] hub 2-2:1.0: USB hub found [ 1.686509] hub 2-2:1.0: 3 ports detected [ 1.970502] usb 2-3: new full-speed USB device number 3 using ohci-pci [ 2.248502] usb 2-3: New USB device found, idVendor=05ac, idProduct=1000 [ 2.263824] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.280501] usb 2-2.1: new full-speed USB device number 4 using ohci-pci [ 2.295460] hidraw: raw HID events driver (C) Jiri Kosina [ 2.343861] usbcore: registered new interface driver usbhid [ 2.345503] ata3: failed to resume link (SControl 0) [ 2.345535] ata3: SATA link down (SStatus 0 SControl 0) [ 2.376290] usbhid: USB HID core driver [ 2.385733] input: HID 05ac:1000 as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-3/2-3:1.0/0003:05AC:1000.0001/input/input0 [ 2.389483] usb 2-2.1: New USB device found, idVendor=413c, idProduct=2010 [ 2.389485] usb 2-2.1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.389487] usb 2-2.1: Product: Dell USB Keyboard [ 2.389489] usb 2-2.1: Manufacturer: Dell [ 2.400034] input: Dell Dell USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.1/2-2.1:1.0/0003:413C:2010.0003/input/input1 [ 2.450629] hid-generic 0003:413C:2010.0003: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0001:01:0b.0-2.1/input0 [ 2.475568] input: Dell Dell USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.1/2-2.1:1.1/0003:413C:2010.0004/input/input2 [ 2.501607] hid-generic 0003:05AC:1000.0001: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:01:0b.0-3/input0 [ 2.511670] input: HID 05ac:1000 as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-3/2-3:1.1/0003:05AC:1000.0002/input/input3 [ 2.552559] hid-generic 0003:413C:2010.0004: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0001:01:0b.0-2.1/input1 [ 2.552737] hid-generic 0003:05AC:1000.0002: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:01:0b.0-3/input1 [ 2.643516] usb 2-2.3: new low-speed USB device number 5 using ohci-pci [ 2.760487] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040 [ 2.778277] usb 2-2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.796084] usb 2-2.3: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 2.813944] usb 2-2.3: Manufacturer: Microsoft [ 2.841294] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2.3/2-2.3:1.0/0003:045E:0040.0005/input/input4 [ 2.856724] hid-generic 0003:045E:0040.0005: input,hidraw4: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0001:01:0b.0-2.3/input0 [ 3.366505] ata4: failed to resume link (SControl 0) [ 3.385257] ata4: SATA link down (SStatus 0 SControl 0) [ 3.407752] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B C006 PQ: 0 ANSI: 5 [ 3.426546] ata5.00: K2/Shasta alignment limits applied [ 3.455738] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.466535] sd 0:0:0:0: [sda] Write Protect is off [ 3.477124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.477153] sr 4:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray [ 3.477176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.497665] sda: [mac] sda1 sda2 sda3 sda4 sda5 [ 3.498109] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.499262] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.499316] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.541266] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.552066] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.879084] windfarm: initializing for dual-core desktop G5 [ 4.226585] random: nonblocking pool is initialized [ 4.450941] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 5.119281] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 5.139747] systemd[1]: Detected architecture 'ppc64'. [ 5.404458] systemd[1]: Inserted module 'autofs4' [ 5.442843] systemd[1]: Set hostname to <powermac-g5-quad>. [ 6.450092] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 6.470580] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.482109] systemd[1]: Starting Remote File Systems (Pre). [ 6.505249] systemd[1]: Reached target Remote File Systems (Pre). [ 6.516706] systemd[1]: Starting Encrypted Volumes. [ 6.539605] systemd[1]: Reached target Encrypted Volumes. [ 6.551008] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 6.574457] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.586201] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 6.598056] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.609958] systemd[1]: Starting Paths. [ 6.633772] systemd[1]: Reached target Paths. [ 6.645579] systemd[1]: Expecting device dev-disk-by\x2duuid-861a4b9b\x2df791\x2d4100\x2d9e21\x2d4ed0d0740fe9.device... [ 6.669972] systemd[1]: Starting Root Slice. [ 6.694434] systemd[1]: Created slice Root Slice. [ 6.706577] systemd[1]: Starting User and Session Slice. [ 6.730979] systemd[1]: Created slice User and Session Slice. [ 6.742850] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 6.766959] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.779005] systemd[1]: Starting Delayed Shutdown Socket. [ 6.802699] systemd[1]: Listening on Delayed Shutdown Socket. [ 6.814190] systemd[1]: Starting Journal Socket (/dev/log). [ 6.836860] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.847876] systemd[1]: Starting udev Control Socket. [ 6.869838] systemd[1]: Listening on udev Control Socket. [ 6.880654] systemd[1]: Starting udev Kernel Socket. [ 6.902413] systemd[1]: Listening on udev Kernel Socket. [ 6.913188] systemd[1]: Starting Journal Socket. [ 6.934107] systemd[1]: Listening on Journal Socket. [ 6.944137] systemd[1]: Starting System Slice. [ 6.964291] systemd[1]: Created slice System Slice. [ 6.974177] systemd[1]: Started File System Check on Root Device. [ 6.984019] systemd[1]: Starting system-getty.slice. [ 7.003866] systemd[1]: Created slice system-getty.slice. [ 7.013660] systemd[1]: Starting Increase datagram queue length... [ 7.095808] systemd[1]: Started Set Up Additional Binary Formats. [ 7.113446] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 7.134637] systemd[1]: Mounting Huge Pages File System... [ 7.155603] systemd[1]: Mounting POSIX Message Queue File System... [ 7.176678] systemd[1]: Mounting Debug File System... [ 7.197497] systemd[1]: Starting udev Coldplug all Devices... [ 7.349452] systemd[1]: Starting Load Kernel Modules... [ 7.382007] systemd[1]: Starting Slices. [ 7.401752] systemd[1]: Reached target Slices. [ 7.422320] systemd[1]: Started Increase datagram queue length. [ 7.432243] systemd[1]: Starting Syslog Socket. [ 7.451381] systemd[1]: Listening on Syslog Socket. [ 7.460959] systemd[1]: Starting Journal Service... [ 7.490881] systemd[1]: Started Journal Service. [ 7.575966] fuse init (API version 7.23) [ 7.817656] loop: module loaded [ 8.130023] snd-aoa-fabric-layout: Using PMF GPIOs [ 8.213394] PowerMac i2c bus smu 14 registered [ 8.228140] PowerMac i2c bus smu 11 registered [ 8.236934] i2c i2c-1: i2c-powermac: register /smu@0,0/smu-i2c-control@0/i2c-bus@b/sat@b0 [ 8.237030] i2c i2c-1: i2c-powermac: register /smu@0,0/smu-i2c-control@0/i2c-bus@b/sat@b2 [ 8.237101] i2c i2c-1: i2c-powermac: register /smu@0,0/smu-i2c-control@0/i2c-bus@b/system-clock@d4 [ 8.237170] PowerMac i2c bus mac-io 0 registered [ 8.245882] i2c i2c-2: i2c-powermac: register /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0/codec@8c [ 8.246077] i2c i2c-2: I2C transfer at 0x46 failed, size 2, err -6 [ 8.246080] snd-aoa-codec-onyx: failed to read control register [ 8.254866] PowerMac i2c bus mac-io 0 registered [ 8.263594] i2c i2c-3: i2c-powermac: register /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0/codec@8c [ 8.263973] i2c i2c-3: I2C transfer at 0x46 failed, size 2, err -6 [ 8.263975] snd-aoa-codec-onyx: failed to read control register [ 8.263985] i2c i2c-3: i2c-powermac: register /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0/codec@24 [ 8.264051] PowerMac i2c bus u4 1 registered [ 8.264054] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@94 [ 8.264092] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@96 [ 8.264117] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@98 [ 8.264153] i2c i2c-4: i2c-powermac: register /u4@0,f8000000/i2c@f8001000/i2c-bus@1/temp-monitor@9c [ 8.427167] systemd-udevd[211]: starting version 215 [ 9.168492] windfarm: CPUs control loops started. [ 9.872800] pmac_zilog: 0.6 (Benjamin Herrenschmidt <[email protected]>) [ 9.881081] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 9.889581] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 9.909744] Linux agpgart interface v0.103 [ 10.042393] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 10.174815] cfg80211: Calling CRDA to update world regulatory domain [ 10.500544] [drm] Initialized drm 1.1.0 20060810 [ 10.692279] sat 0 partition c4: c4 4 1 7f a0 12 20 5f ff 55 29 14 7b 12 0 0 [ 10.746946] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 10.778674] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 10.793495] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7 [ 10.793515] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0 [ 10.800675] Broadcom 43xx driver loaded [ Features: PNL ] [ 11.428254] checking generic (a0020000 258000) vs hw (a0000000 20000000) [ 11.428259] fb: switching to nouveaufb from OFfb NVDA,Displ [ 11.436742] Console: switching to colour dummy device 80x25 [ 11.437370] nouveau 0000:0a:00.0: enabling device (0006 -> 0007) [ 11.438071] nouveau [ DEVICE][0000:0a:00.0] BOOT0 : 0x047d00a1 [ 11.438081] nouveau [ DEVICE][0000:0a:00.0] Chipset: G70 (NV47) [ 11.438088] nouveau [ DEVICE][0000:0a:00.0] Family : NV40 [ 11.558175] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 11.611131] nouveau [ VBIOS][0000:0a:00.0] using image from PROM [ 11.611532] nouveau [ VBIOS][0000:0a:00.0] BIT signature found [ 11.611540] nouveau [ VBIOS][0000:0a:00.0] version 00.00.00.10.10 [ 11.611602] nouveau W[ VBIOS][0000:0a:00.0] DCB table not found [ 11.611615] nouveau W[ VBIOS][0000:0a:00.0] DCB table not found [ 11.611658] nouveau E[ VBIOS][0000:0a:00.0] 0x47a4[ ]: unknown opcode 0xff [ 11.611666] nouveau E[ DEVINIT][0000:0a:00.0] init failed, -22 [ 11.611673] nouveau E[ DRM] failed to create 0x00000080, -22 [ 11.612251] nouveau: probe of 0000:0a:00.0 failed with error -22 [ 11.666202] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.843494] systemd-journald[191]: Received request to flush runtime journal from PID 1 [ 12.203983] sat 0 partition c5: c5 4 1 7f a0 12 20 5f ff 55 29 14 7b 12 0 0 [ 12.647574] usb 2-3: USB disconnect, device number 3 [ 12.670795] usb 2-3: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 [ 13.070185] sat 1 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 13.121517] usb 2-3: new full-speed USB device number 6 using ohci-pci [ 13.328523] cfg80211: Calling CRDA to update world regulatory domain [ 13.336556] cfg80211: World regulatory domain updated: [ 13.336581] cfg80211: DFS Master region: unset [ 13.336587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 13.336615] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.336634] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 13.336653] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 13.336673] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 13.336693] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 13.336713] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 13.336732] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 13.336751] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 13.539307] usb 2-3: New USB device found, idVendor=05ac, idProduct=8207 [ 13.539335] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.657535] Bluetooth: Core ver 2.20 [ 13.657573] NET: Registered protocol family 31 [ 13.657579] Bluetooth: HCI device and connection manager initialized [ 13.657659] Bluetooth: HCI socket layer initialized [ 13.657668] Bluetooth: L2CAP socket layer initialized [ 13.657691] Bluetooth: SCO socket layer initialized [ 13.720292] sat 1 partition c4: c4 4 1 7f a0 12 20 5f ff 55 b8 14 7b 12 0 0 [ 13.792654] usbcore: registered new interface driver btusb [ 14.163842] Adding 793808k swap on /dev/sda4. Priority:-1 extents:1 across:793808k FS [ 14.368478] systemd-journald[191]: Received request to flush runtime journal from PID 1 [ 14.586046] sat 1 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 59 0 20 0 0 0 7 89 37 0 a0 0 0 [ 15.220611] RPC: Registered named UNIX socket transport module. [ 15.220622] RPC: Registered udp transport module. [ 15.220628] RPC: Registered tcp transport module. [ 15.220634] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.232048] sat 1 partition c5: c5 4 1 7f a0 12 20 5f ff 55 48 15 7b 12 0 0 [ 15.264163] FS-Cache: Loaded [ 15.345940] FS-Cache: Netfs 'nfs' registered for caching [ 15.397183] Installing knfsd (copyright (C) 1996 [email protected]). [ 15.860195] windfarm: Backside control loop started. [ 15.912570] windfarm: Slots control loop started. [ 16.018393] windfarm: Drive bay control loop started. [ 16.943787] usb 2-2: USB disconnect, device number 2 [ 16.943812] usb 2-2.1: USB disconnect, device number 4 [ 16.985553] usb 2-2.3: USB disconnect, device number 5 [ 21.012837] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.012850] Bluetooth: BNEP filters: protocol multicast [ 21.012865] Bluetooth: BNEP socket layer initialized [ 21.897662] u3msi: allocated virq 0x20 (hw 0x8) addr 0xfee00000 [ 21.941183] u3msi: allocated virq 0x21 (hw 0x9) addr 0xfee00000 [ 22.114507] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) [ 22.137638] b43-pci-bridge 0001:01:01.0: Using 32-bit DMA via iommu [ 24.651029] tg3 0001:05:04.0 eth0: Link is up at 1000 Mbps, full duplex [ 24.651059] tg3 0001:05:04.0 eth0: Flow control is on for TX and on for RX [ 24.740101] tg3 0001:05:04.1 eth1: Link is up at 1000 Mbps, full duplex [ 24.740119] tg3 0001:05:04.1 eth1: Flow control is on for TX and on for RX
NVDA,BMP
Description: Binary data
_______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
