These patches are adding support for outputting 2560x1440@56 over HDMI. This needs a pixel clock of 225 MHz which was not supported before.
This was tested in a dual monitor setup with a GF114 (GTX 560 TI) and one HDMI monitor running with 2560x1440@56 and one DVI monitor running with 1920x1200@60. This still needs testing on other graphics cards and with dual link DVI. There is no Maintainers entry for nouveau. This is based on top of Linux 4.3-rc4. I am not used to the process uses by nouveau developers and I hope this is the correct way to get this patch into upstream Linux. changes since v1: * rebase on 4.3-rc4 * update commit message Hauke Mehrtens (2): drm/nouveau: activate dual link TMDS links only when possible drm/nouveau: increase max pixel clock to 225 MHZ for HDMI drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++-- drivers/gpu/drm/nouveau/nv50_display.c | 8 ++++---- drivers/gpu/drm/nouveau/nvkm/engine/disp/gf119.c | 2 +- drivers/gpu/drm/nouveau/nvkm/engine/disp/nv50.c | 2 +- 4 files changed, 10 insertions(+), 8 deletions(-) -- 2.1.4 _______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
