https://bugs.freedesktop.org/show_bug.cgi?id=70354
--- Comment #81 from Julien Isorce <[email protected]> --- Hi, here is the output of: sudo lspci -nnv -d 10de:0fe4 01:00.0 3D controller [0302]: NVIDIA Corporation GK107M [GeForce GT 750M] [10de:0fe4] (rev a1) Subsystem: Samsung Electronics Co Ltd Device [144d:c740] Flags: bus master, fast devsel, latency 0, IRQ 36 Memory at f6000000 (32-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f0000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at f7000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900] #19 Kernel driver in use: nouveau As I do not see any difference adding "options nouveau config=War00C800_0=1" /etc/modprobe.d/nouveau-kms.conf, is there a command or log to checke if it is really set ? Also if you can guide me what to change in git://people.freedesktop.org/~darktama/nouveau in order to hardcode it ? I tried to took example from : patch "[PATCH] pci: enable c800 magic for Medion Erazer X7827" but I am missing these hex values. Thx -- You are receiving this mail because: You are the assignee for the bug.
_______________________________________________ Nouveau mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/nouveau
