On 11/14/2016 06:17 AM, Pierre Moreau wrote: > Hello Ben, > > You can find below my results; there is a slight over-representation of 1st > gen > Tesla cards, but… that’s what I have. :-D No regressions observed, apart from: > > * screen rotation on G80, MCP79 > * resuming on G86 Hey Pierre,
Thanks for testing all this! Notes below. > > I’ll retest those cards with your linux-4.10 branch but without the atomic + > DP > serie. > > Pierre > > > Tested: linux-4.10 (HEAD at b27add13f "drm/nouveau/fifo/gf100-: protect > channel preempt with subdev mutex) > Against: 4.8.7 > Fullscreen game: Portal > (FAIL is: it is not working, but neither did it before.) > > > G80: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: REGRESSION (disp: ERROR 5 [INVALID_STATE] ACK, I'll look into this one. > * Suspend: OK > * Hotplugging: - > * Fullscreen game: FAIL (fail ttm_validate, vaildate: -12) (different on > 4.8.7, but still failing) > > G84: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: FAIL (DRM: base-0: timeout) > * Hotplugging: OK > * Fullscreen game: OK > > G86: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: REGRESSION (PGRAPH TLB flush idle timeout fail) Hm, I wouldn't expect something like this to be related. Is this reproducible (works reliably before, fails reliably after)? > * Hotplugging: - > * Fullscreen game: FAIL (gr: TRAP_PROP - TP 0 - 00000040 [RT_FAULT] - > Address 004bed0000) (does not work im 4.8.7 either, though there was no trap, > just FAIL ttm_validate & cie) > > G92: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: - > * Fullscreen game: OK > > G94: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: - > * Fullscreen game: OK > > G96: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: - > * Fullscreen game: OK > > G98: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: OK > * Fullscreen game: FAIL (fail ttm_validate, vaildate: -12) > > MCP79: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: REGRESSION (no freeze, no errors, cursor was correctly > updated, but screen does not update though switching to TTY works just fine) I don't have the hardware for this, but hopefully whatever I uncover on G80 will help too :) Thanks again, Ben. > * Suspend: OK > * Hotplugging: - > * Fullscreen game: OK > > GT200: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: FAIL (PGRAPH TLB idle timeout fail) > * Hotplugging: - > * Fullscreen game: OK > > GF100: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: - > * Fullscreen game: OK > > GF114: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: - > * Fullscreen game: OK > > GK208: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: OK > * Fullscreen game: OK > > GM206: > * Basic modesetting: OK > * VT switching: OK > * Changing rotation: OK > * Suspend: OK > * Hotplugging: OK > * Fullscreen game: OK > > > > On 07:41 pm - Nov 04 2016, Ben Skeggs wrote: >> Hey all, >> >> I've just pushed out the initial Nouveau support for $subject \o/ >> >> As the atomic modesetting transition is basically a rewrite of the KMS >> portion of the driver, I would be very grateful for any additional >> testing that people could provide (even as simple as just booting and >> making sure you get a display is valuable). >> >> There's a Linux tree at >> https://github.com/skeggsb/linux/tree/linux-4.10, and the code also >> exists in my usual development tree[1] on the master branch (which is >> currently based on Dave's drm-next tree for Linux 4.10). >> >> There's another branch (devel-kms) in the same repository, which is the >> same code on top of what's currently Linux 4.9. If you have problems >> with the 4.10 code, I'd definitely be interested in seeing if they exist >> on the 4.9 branch too. >> >> Thanks in advance! >> Ben. >> >> [1] https://github.com/skeggsb/nouveau >> > > > > >> _______________________________________________ >> Nouveau mailing list >> [email protected] >> https://lists.freedesktop.org/mailman/listinfo/nouveau >
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nouveau mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/nouveau
