Greetings
Running a debian testing system
$ uname -r
5.4.0-4-amd64
with 2 graphics cards.
The one I'm working on is a: GP 107 Nvidia GTX 1050 Ti
Asus ROG GeForce GX 1050 Ti Strix-GTX1050 Ti with 2 - DVI plus 1 DP1.4
and I HDMI2.0 ports (four in total).
I have been running 2 1920x1080 monitors on this card (and its
previous nvidia 570) for quite some time. Been running nouveau for the
last about 4 years as my last nvidia 570 (started with 3) is EOL by
nvidia.
Have gotten quite comfortable using xrandr setting up the second card
(the nvidia 570) and its 2 monitors. Nouveau software is:
xserver-xorg-video-nouveau -> 1:1.0.16-1 ;
xserver-xorg -> 1:7.7+21 ; and libdrm-nouveau2:amd64 -> 2.4.102-1 .
I want to add a 4k TV onto the HDMI port on card #1.
Can't seem to get the card and the TV talking.
Tried a number of things in xrandr:
$ xrandr
Screen 0: minimum 320 x 200, current 3840 x 3000, maximum 16384 x 16384
DVI-D-1 connected primary 1920x1080+0+1920 (normal left inverted right
x axis y axis) 477mm x 268mm
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 connected 1920x1080+1920+1920 (normal left inverted right x axis
y axis) 477mm x 268mm
DVI-I-1-1 connected 1920x1080+1080+0 inverted (normal left inverted
right x axis y axis) 477mm x 268mm
DVI-I-1-2 connected 1080x1920+0+0 left (normal left inverted right x
axis y axis) 477mm x 268mm
HDMI-1-2 connected (normal left inverted right x axis y axis)
1920x1080 59.97 59.96 60.00 50.00 59.94 59.93
30.00 25.00 24.00 29.97 23.98
DP-1-2 disconnected (normal left inverted right x axis y axis)
Screen 0: minimum 320 x 200, current 3840 x 3000, maximum 16384 x 16384
DVI-D-1 connected primary 1920x1080+0+1920 (normal left inverted right
x axis y axis) 477mm x 268mm
HDMI-1 disconnected (normal left inverted right x axis y
Screen 0: minimum 320 x 200, current 3840 x 3000, maximum 16384 x 16384
DVI-D-1 connected primary 1920x1080+0+1920 (normal left inverted right
x axis y axis) 477mm x 268mm
HDMI-1 disconnected (normal left inverted right x axis y axis)
DP-1 connected 1920x1080+1920+1920 (normal left inverted right x axis
y axis) 477mm x 268mm
DVI-I-1-1 connected 1920x1080+1080+0 inverted (normal left inverted
right x axis y axis) 477mm x 268mm
DVI-I-1-2 connected 1080x1920+0+0 left (normal left inverted right x
axis y axis) 477mm x 268mm
HDMI-1-2 connected (normal left inverted right x axis y axis)
1920x1080 59.97 59.96 60.00 50.00 59.94 59.93
30.00 25.00 24.00 29.97 23.98
DP-1-2 disconnected (normal left inverted right x axis y axis)
end 2248 total 2576 skew 0 clock 67.16KHz
v: height 1080 start 1083 end 1088 total 1120 clock 59.96Hz
3840x2160_60.00 (0x6ce) 712.750MHz -HSync +VSync
h: width 3840 start 4160 end 4576 total 5312 skew 0 clock 134.18KHz
v: height 2160 start 2163 end 2168 total 2237 clock 59.98Hz
h: width 960 start 1008 end 1040 total 1120 skew 0 clock 33.26KHz
v: height 540 start 543 end 548 total 556 clock 59.82Hz
3840x2160_60.00 (0x6ce) 712.750MHz -HSync +VSync
h: width 3840 start 4160 end 4576 total 5312 skew 0 clock 134.18KHz
v: height 2160 start 2163 end 2168 total 2237 clock
59.98Hz axis)
DP-1 connected 1920x1080+1920+1920 (normal left inverted right x axis
y axis) 477mm x 268mm
DVI-I-1-1 connected 1920x1080+1080+0 inverted (normal left inverted
right x axis y axis) 477mm x 268mm
DVI-I-1-2 connected 1080x1920+0+0 left (normal left inverted right x
axis y axis) 477mm x 268mm
HDMI-1-2 connected (normal left inverted right x axis y axis)
1920x1080 59.97 59.96 60.00 50.00 59.94 59.93
30.00 25.00 24.00 29.97 23.98
I've tried turning HDMI-1-2 off; turning HDMI-1-2 on;
# cvt 3840 2160
# 3840x2160 59.98 Hz (CVT 8.29M9) hsync: 134.18 kHz; pclk: 712.75 MHz
Modeline "3840x2160_60.00" 712.75 3840 4160 4576 5312 2160 2163
2168 2237 -hsync +vsync
root@memyself:/# gtf 3840 2160
usage: gtf x y refresh [-v|--verbose] [-f|--fbmode] [-x|--xorgmode]
x : the desired horizontal resolution (required)
y : the desired vertical resolution (required)
refresh : the desired refresh rate (required)
-v|--verbose : enable verbose printouts (traces each step of the computation)
-f|--fbmode : output an fbset(8)-style mode description
-x|--xorgmode : output an Xorg-style mode description (this is the default
if no mode description is requested)
# exit
logout
memyself@debianone:~$ xrandr --newmode "3840x2160_60.00" 712.75 3840
4160 4576 5312 2160 2163 2168 2237 -hsync +vsync
memyself@debianone:~$ xrandr --addmode HDMI-1-2 3840x2160_60.00
memyself@debianone:~$ xrandr --output HDMI-1-2 --mode 3840x2160_60.00
xrandr: cannot find crtc for output HDMI-1-2
One possibility - - - - screen 0 is only 3840 x 3000 (which covers the
previous 4 monitors).
I think I need to stretch screen 0 to 7680 x 3000 for starters.
What else do I need to do to get the hdmi port talking to the TV?
TIA
(Hopefully the question is not inappropriate is so please advise!!!!
If more information is needed please advise!!)
_______________________________________________
Nouveau mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/nouveau
