Hi and thanks for the quick reply yes, I noticed that you answered the same thing only some hours ago.
However even if I ignore the test result, I still get the problems when connecting nox to the switch, as described below: Any clues there? Thanks (ps. sorry for the duplicate Martin) > > When I tried the next the next step of noxrepo.org/manual < > http://noxrepo.org/manual> ( ./nox_core -v -i pgen:10 packetdump ) I got: > > > ------------------------------------------------------------------------------------------ > 00001|packetgen|DBG:waiting for features request > 00002|packetgen|DBG:waiting for features request > ... > ... /(this went on for 5 secs)/ > ... > 01599|packetgen|DBG:waiting for features request > 01600|packetgen|DBG:waiting for features request > 01601|packetgen|DBG:waiting for features request > 01602|packetgen|DBG:waiting for features request > 01603|packetgen|DBG:waiting for features request > 01604|packetgen|DBG:waiting for features request > 01605|nox|WARN:pgen:: closing connection due to timeout after 5 seconds in > sending features request state > > ------------------------------------------------------------------------------------------ > > > I moved on with the guide and tried to set up nox with openflow, setting up > the switch looked ok: > > > ----------------------------------------------------------------------------------------- > hda:/cdrom# ./dpctl addif nl:0 eth0 > eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 > device eth0 entered promiscuous mode > send_openflow_skb: send failed: -3 <-------(I'm > not sure if this is supposed to be here, i guess not) > > hda:/cdrom# ./dpctl addif nl:0 eth1 > eth1: link up, 100Mbps, full-duplex, lpa 0x05E1 > device eth1 entered promiscuous mode > send_openflow_skb: send failed: -3 <-------(same) > > hda:/cdrom# ./dpctl show nl:0 > features_reply (xid=36c3c26e):dp id:505400000003 > tables: exact:131072, compressed:0, general:100 > buffers: size:-1, number:256 > features: capabilities:0x17, actions:0xff > 0(eth0): addr:50:54:00:00:00:03, speed:100, flags:0, feat:0xf > 1(eth1): addr:50:54:00:00:00:04, speed:100, flags:0, feat:0xf > LOCAL(of0): addr:3a:7e:bd:e6:fc:7a, speed:0, flags:0, feat:0 > get_config_reply (xid=f93e7de): miss_send_len=128 > hda:/cdrom# > > > ------------------------------------------------------------------------------ > > > and the same problem reflected when I tried to connect the controller with > the switch : > > > [NOX screen]: > > -------------------------------------------------------------------------------------- > (initialization ommited but looked fine) > ... > 00028|openflow|DBG:Passive tcp interface bound to port 2525 > 00029|openflow|DBG:Passive tcp interface received connection > 00030|nox|WARN:stream: closing connection due to timeout after 5 seconds in > sending features request state > 00031|openflow|DBG:Passive tcp interface received connection > 00032|nox|WARN:stream: closing connection due to timeout after 5 seconds in > sending features request state > 00033|openflow|DBG:Passive tcp interface received connection > 00034|nox|WARN:stream: closing connection due to timeout after 5 seconds in > sending features request state > 00035|openflow|DBG:Passive tcp interface received connection > 00036|openflow|WARN:stream: connection closed by peer > <---(this was when i sent Ctrl^C to the openflow switch (screen below) > 00037|nox|WARN:Error sending features request: Unknown error 4294967295 > > -------------------------------------------------------------------------------------- > > [openflow switch screen]: > > -------------------------------------------------------------------------------------- > hda:/cdrom# ./secchan nl:0 tcp:10.0.2.2:2525 <http://10.0.2.2:2525> > 00001|rconn|WARN:nl:0: connected > 00002|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connected > 00003|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connection > closed > 00004|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connected > 00005|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connection > closed > 00006|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connected > 00007|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connection > closed > 00008|rconn|WARN:tcp:10.0.2.2:2525 <http://10.0.2.2:2525>: connected > Ctrl^C > > -------------------------------------------------------------------------------------- > > > Has anyone come across any similar problem? > Any input appreciated > > Regards, > Kyriakos > > > ------------------------------------------------------------------------ > > _______________________________________________ > nox-dev mailing list > [email protected] > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > >
_______________________________________________ nox-dev mailing list [email protected] http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
