Discovery only shows links between switches, not between switches and
hosts. For that, you'll have to explore authenticator.
Hi
I am new with this module -
I have switch setup and connected with flowvisor - and nox_core ran
with discoveryws and discovery module.
The switch also connected to 2 other physical machines
However, when I ran webservice to look at the discovery object - I saw
it only show
Ethernet packet of the switch - where the dst value is the value on
the file ethernet.py (NDP_MULTICAST)
I am wondering what can I do to get nox discovery to show a topology
connection between switch and the other 2 client machines?
Below are the print out of the discovery object of LLDP packets
PORT 0: EthernetPackageDESC:
[5a:8c:29:22:d3:a9>01:23:20:00:00:01:LLDP]<chassis
ID:5a:8c:29:22:d3:a9><port ID:00:00><ttl:120><tlv end>
PORT : 1 EthernetPackageDESC:
[5a:8c:29:22:d3:a9>01:23:20:00:00:01:LLDP]<chassis
ID:5a:8c:29:22:d3:a9><port ID:00:01><ttl:120><tlv end>
~
Thanks
Nguyen
------------------------------------------------------------------------
_______________________________________________
nox-dev mailing list
[email protected]
http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
_______________________________________________
nox-dev mailing list
[email protected]
http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
