Hi Martin I run command below but failure can you please email me the command?
here is what I did r...@rm:~/nox# git branch -a * master remotes/origin/openflow-1.0 remotes/origin/HEAD -> origin/master remotes/origin/master remotes/origin/openflow-0.9 remotes/origin/openflow-1.0 > git checkout -b remotes/origin/openflow-1.0 myversion fatal: git checkout: updating paths is incompatible with switching branches. Did you intend to checkout 'myversion' which can not be resolved as commit? Thanks so much Thuymai ________________________________ From: Martin Casado <[email protected]> To: Chonduy Nguyen <[email protected]> Cc: [email protected]; [email protected] Sent: Tue, January 26, 2010 5:54:51 PM Subject: Re: [nox-dev] nox version For 1.0 support, you need to pull from the nox 1.0 branch (git branch -a). The version number is slowly creeping towards 1.0. Sorry about the confusion there .. > > Hi Martin, > > I just upgrade openflow to 1.0.0 but since the switch can't connect to nox > I check nox version - which I did download from website last week (on the > link said version 0.6) > However, when I run nox_core command below - it showed me the nox_core > version 0.8.0 ( which seems openflow old version) > > > ./nox_core --version > NOX 0.8.0~full~beta (nox_core), compiled Jan 21 2010 12:46:53 > Compiled with OpenFlow 0x97 (exp) > > > Is that mean the nox_core version that I get is really not 0.6 or the > nox_core software didnot update version string correctly? > > Thanks > > Thuymai > > > > ------------------------------------------------------------------------ > *From:* Martin Casado <[email protected]> > *To:* Chonduy Nguyen <[email protected]> > *Cc:* [email protected]; [email protected] > *Sent:* Tue, January 26, 2010 3:34:37 PM > *Subject:* Re: [nox-dev] directoryws not on version 0.6 > > Alternatively, you can listen for host_bind_event which is thrown for each > new host detected. It contains the dpid, port, and addresses associated with > each detected host. > > > Hi Martin, > > > > I saw the method get_authed_addresses(*args) require hostid - where I > > expect the module discovered link connection > > between host and switch as we don't know what hostid or switch outthere. > > is there anyway I can get the list of hosts in authenticator without > > knowning or passing any info? > > > > Thanks > > > > ThuymaiNguyen > > > > ------------------------------------------------------------------------ > > *From:* Martin Casado <[email protected] <mailto:[email protected]>> > > *To:* Chonduy Nguyen <[email protected] <mailto:[email protected]>> > > *Cc:* [email protected] <mailto:[email protected]>; > > [email protected] <mailto:[email protected]> > > *Sent:* Tue, January 26, 2010 1:33:08 PM > > *Subject:* Re: [nox-dev] directoryws not on version 0.6 > > > > It requires traffic in order to reconstruct host-level information. > > > > > Hi Martin, > > > > > > Thanks for your info, So, I can just run nox_core component > > > pyauthenticator so this component will discover nodes which are > > > connecting to the switch > > > "Without any traffic generated from that host to switch " ? or I need to > > > run traffic ( example: having host1 ping host2) > > > > > > Thanks > > > > > > Thuymai > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > *From:* Martin Casado <[email protected] <mailto:[email protected]> > > > <mailto:[email protected] <mailto:[email protected]>>> > > > *To:* Chonduy Nguyen <[email protected] <mailto:[email protected]> > > > <mailto:[email protected] <mailto:[email protected]>>> > > > *Cc:* [email protected] <mailto:[email protected]> > > > <mailto:[email protected] <mailto:[email protected]>> > > > *Sent:* Tue, January 26, 2010 12:47:57 PM > > > *Subject:* Re: [nox-dev] directoryws not on version 0.6 > > > > > > There are no webservices which directly expose authenticator. To do > > > that, you're going to have to resolve PyAuth() and then call the accessor > > > methods directly (e.g. get_authed_addresses(..) ). > > > > > > As an example of how to create a webservice, see > > > src/nox/webapps/miscws/cpustats.py > > > > > > > > > > > Hi Martin > > > > > > > > I upgraded nox to be 0.6 - but observed that the directorymanagerws.py > > > > and its directory folder is not > > > > available on this version - This one is the one using authenticator > > > > > > > > Do you have any idea? > > > > > > > > I would like to see full topology of switch connects to host - etc... > > > > > > > > Can you please give any more details advice ? > > > > > > > > Thank you, > > > > > > > > TNguyen > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > *From:* Martin Casado <[email protected] <mailto:[email protected]> > > > > <mailto:[email protected] <mailto:[email protected]>> > > > > <mailto:[email protected] <mailto:[email protected]> > > > > <mailto:[email protected] <mailto:[email protected]>>>> > > > > *To:* Chonduy Nguyen <[email protected] <mailto:[email protected]> > > > > <mailto:[email protected] <mailto:[email protected]>> > > > > <mailto:[email protected] <mailto:[email protected]> > > > > <mailto:[email protected] <mailto:[email protected]>>>> > > > > *Cc:* [email protected] <mailto:[email protected]> > > > > <mailto:[email protected] <mailto:[email protected]>> > > > > <mailto:[email protected] <mailto:[email protected]> > > > > <mailto:[email protected] <mailto:[email protected]>>> > > > > *Sent:* Mon, January 25, 2010 10:45:11 PM > > > > *Subject:* Re: [nox-dev] nox core discovery > > > > > > > > Discovery only shows links between switches, not between switches and > > > > hosts. For that, you'll have to explore authenticator. > > > > > > > > > Hi > > > > > > > > > > I am new with this module - > > > > > I have switch setup and connected with flowvisor - and nox_core ran > > > > > with discoveryws and discovery module. > > > > > The switch also connected to 2 other physical machines > > > > > > > > > > However, when I ran webservice to look at the discovery object - I > > > > > saw it only show > > > > > > > > > > Ethernet packet of the switch - where the dst value is the value on > > > > > the file ethernet.py (NDP_MULTICAST) > > > > > > > > > > I am wondering what can I do to get nox discovery to show a topology > > > > > connection between switch and the other 2 client machines? > > > > > > > > > > Below are the print out of the discovery object of LLDP packets > > > > > > > > > > PORT 0: EthernetPackageDESC: > > > > > [5a:8c:29:22:d3:a9>01:23:20:00:00:01:LLDP]<chassis > > > > > ID:5a:8c:29:22:d3:a9><port ID:00:00><ttl:120><tlv end> > > > > > PORT : 1 EthernetPackageDESC: > > > > > [5a:8c:29:22:d3:a9>01:23:20:00:00:01:LLDP]<chassis > > > > > ID:5a:8c:29:22:d3:a9><port ID:00:01><ttl:120><tlv end> > > > > > ~ > Thanks > > > > > > > > > > Nguyen > > > > > > ------------------------------------------------------------------------ > > > > > > > > > > _______________________________________________ > > > > > nox-dev mailing list > > > > > [email protected] <mailto:[email protected]> > > > > > <mailto:[email protected] <mailto:[email protected]>> > > > > > <mailto:[email protected] <mailto:[email protected]> > > > > > <mailto:[email protected] <mailto:[email protected]>>> > > > > > <mailto:[email protected] <mailto:[email protected]> > > > > > <mailto:[email protected] <mailto:[email protected]>> > > > > > <mailto:[email protected] <mailto:[email protected]> > > > > > <mailto:[email protected] <mailto:[email protected]>>>> > > > > > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > > > > > > > > > > > > > > > > > > > > >
_______________________________________________ nox-dev mailing list [email protected] http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
