Hi many thanks to murphy and kk. the problem solved. git clone git://noxrepo.org/nox >> cd nox >> git checkout openflow-1.0 >> ./boot.sh >> mkdir build >> ../configure --with-python=yes --enable-ndebug >> make
Regards ________________________________________ From: James "Murphy" McCauley [jam...@nau.edu] Sent: 13 July 2010 18:45 To: kk yap Cc: Kiani, Parham; nox-dev@noxrepo.org Subject: Re: [nox-dev] problem with NOX I don't _think_ the checkout was the problem. Aren't those commands equivalent (at least with current versions of git)? -- Murphy On Jul 13, 2010, at 9:03 AM, kk yap wrote: > Hi Kiani, > > There is a typo or a mistake in the command. > > git checkout openflow-1.0 > > should be > > git checkout -b openflow-1.0 orgin/openflow-1.0 > > Regards > KK > > On 13 July 2010 08:55, Kiani, Parham <pki...@essex.ac.uk> wrote: >> Hi Murphy >> thanks for your help. I have triyed to install it again, unfortunately, when >> i run "make" it seems it never stop or compile, it repeats some commands, so >> it force me to stoped by hand. i was wondering if you could take a look at >> it.( attached file) >> git clone git://noxrepo.org/nox >> cd nox >> git checkout openflow-1.0 >> ./boot.sh >> mkdir build >> ../configure --with-python=yes --enable-ndebug >> make >> >> >> ________________________________________ >> From: James "Murphy" McCauley [jam...@nau.edu] >> Sent: 13 July 2010 14:52 >> To: Kiani, Parham >> Cc: nox-dev@noxrepo.org >> Subject: Re: [nox-dev] problem with connect Nox to switch >> >> Looks like a simple version mismatch. The version of Open vSwitch >> you're using supports OpenFlow 1.0 (wire protocol 0x01). The version of >> NOX you're using supports OpenFlow 0.8.9 (wire protocol 0x97). >> >> So somehow you need to get your versions matched up. I have no idea how >> FlowVisor factors in, since I don't know which versions of OpenFlow it >> supports, but if you want to build a version of NOX that supports >> OpenFlow 1.0, you should use the openflow-1.0 branch: >> git clone git://noxrepo.org/nox >> cd nox >> git checkout openflow-1.0 >> >> -- Murphy >> >> On Tue, 2010-07-13 at 14:05 +0100, Kiani, Parham wrote: >>> Hi all >>> I have a controller with nox and flowvisor and a computer with 5ports >>> (openvswitch) as a first switch. i used to connect my switch to controller >>> easily( ovs-openflowd dp0 tcp: 192.168.1.2). I have tried with help of >>> vmware create another slice and install openvswitch as second switch. the >>> problem accure when I wanted to connnect two switches to controller. but >>> now, I can not even connect the first switch to controller. I have >>> planning to create three switch in this computer ( 5ports), do i need three >>> nox and flowvisor? thaks in advance . >>> >>> >>> :/nox/build/src$ sudo ./nox_core -i ptcp:6633 switch packetdump >>> NOX 0.8.0~full~beta (nox_core), compiled Jun 10 2010 19:46:40 >>> Compiled with OpenFlow 0x97 (exp) >>> 00001|openflow|WARN:stream: version negotiation failed: we support versions >>> 0x97 to 0x97 inclusive but peer supports no later than version >>> >>> >>> >>> sudo ovs-openflowd dp0 tcp:192.168.1.2 >>> Jul 13 13:34:20|00001|openflowd|INFO|Open vSwitch version 1.0.1 >>> Jul 13 13:34:20|00002|openflowd|INFO|OpenFlow protocol version 0x01 >>> Jul 13 13:34:20|00003|ofproto|INFO|using datapath ID 00000023208adfd2 >>> Jul 13 13:34:20|00004|rconn|INFO|dp0<->tcp:192.168.1.2: connecting... >>> Jul 13 13:34:20|00005|rconn|INFO|dp0<->tcp:192.168.1.2: connected >>> Jul 13 13:34:20|00006|rconn|INFO|dp0<->tcp:192.168.1.2: connection closed >>> by peer >>> >>> >>> Regards >>> >>> >>> >>> _______________________________________________ >>> nox-dev mailing list >>> nox-dev@noxrepo.org >>> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org >> _______________________________________________ >> nox-dev mailing list >> nox-dev@noxrepo.org >> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org >> >> _______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
