Hi Kate, Comments inline.
Regards KK 2010/7/22 오하영 <be...@naver.com> > Hi, my name is Kate. > > I have a question about NOX and OF switch version. > > If I use below command expressed in NOX homepage to install NOX, > > git clone git://noxrepo.org/nox > > Is the NOX version 0.6, right? So is it the controller compiled with > OpenFlow v1.0.? > > Yes, it is v0.6. The controller is on OpenFlow v0.8.9 though. If you want OpenFlow v1.0, you should checkout the openflow-1.0 branch. > But, when I tried next step (Setting Up a Virtual Testing Environment > expressed in NOX homeage) after installing NOX, I have a following problem. > > After logging into the virtual machine monitoring ‘openflow1’ using > root/root and issue the following commands, > > insmod ./openflow_mod.ko # run the openflow datapath > > the virtual machine of openflow shows openflow verion is v0.8.9. Why isn't > the openflow version v1.0.? > > Someone probably has to update the instructions. OpenFlowVMS does allow OpenFlow v1.0. Do check out http://openflowswitch.org/wk/index.php/OpenFlowVMS. > So in fact, my final question is like following. > When I tested a very simple topology in NOX homepage (NOX-OF-host1 and > host2), > I don't know exact reason but, I can't success the connection btw NOX and > OF. > And also I can't success the connection btw host1 and host2. > > You need to have the switch connect to NOX first, else the host cannot get to each other at all. > Thank you very much. > > ---kate. > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org > >
_______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
