This indicates that NOX is probably running just fine.  You need to get your 
switches to connect to it.

-- Murphy

On Dec 9, 2010, at 12:23 AM, Abhishek Majumdar wrote:

> I tried to connect to 6633 with NOX running on the telnet terminal it said 
> "Connection closed by foreign host."
> On the NOX terminal it said "00001|nox|WARN:stream: closing connection due to 
> timeout after 5 seconds in sending features request state"
> Thanks
> Abhishek Majumdar
> 
> On 12/08/2010 11:55 PM, Murphy McCauley wrote:
>> 
>> (CCing the list again)
>> 
>> I don't know much about OpenFlowVMS, so I can't help you too much with that. 
>>  But... there seems to be a typo on 
>> http://www.openflowswitch.org/foswiki/bin/view/OpenFlow/Deployment/HOWTO/LabSetup#4_Controller_Setup
>> 
>> Try grepping for port 6633 instead or 6663.  Also, when you have NOX 
>> running, try just connecting to port 6633 (using telnet or netcat or 
>> something) and see if it connects.
>> 
>> -- Murphy
>> 
>> On Dec 8, 2010, at 9:36 PM, Hasnat Ahmed wrote:
>> 
>>> 
>>> hmmm right.
>>> when i run this command vms-start.py 2hosts-2ofsw.vms.xml refering to step 
>>> 6 of openflow switch in single pc tutorial (for running switches) executed 
>>> successfully i think because no error is displayed.
>>> 
>>> and when i run the commands of basic testing (Step 7 of  
>>> http://openflowswitch.org/foswiki/bin/view/OpenFlow/Deployment/HOWTO/Virtual
>>>  ) 
>>> 
>>> 
>>> netstat -n | grep 6663                      it did not show any out put so 
>>> i think controller listener port is not in listening mode.
>>> 
>>> screen -r host1      it shows an error that host1 is not found 
>>>     
>>> 
>>> scree -r of1             it shows an error that of1 is not found
>>> 
>>> regards
>>> 
>>> Hasnat
>>> 
>>> 
>>> 
>>> 
>>> On Thu, Dec 9, 2010 at 10:11 AM, Murphy McCauley <jam...@nau.edu> wrote:
>>> (I've copied the list; it seems to have been dropped accidentally)
>>> 
>>> It's normal behavior for NOX to start up and wait silently for switches to 
>>> connect to it.  Are you running any switches?
>>> 
>>> -- Murphy
>>> 
>>> On Dec 8, 2010, at 9:06 PM, Hasnat Ahmed wrote:
>>> 
>>>> Hi all,
>>>> 
>>>> i am also facing this issue. 
>>>> 
>>>> Regards,
>>>> 
>>>> Hasnat
>>>> 
>>>> On Thu, Dec 9, 2010 at 8:46 AM, Murphy McCauley <jam...@nau.edu> wrote:
>>>> Were you running any switches that were attempting to connect to it?
>>>> 
>>>> -- Murphy
>>>> 
>>>> On Dec 8, 2010, at 7:39 PM, Abhishek Majumdar wrote:
>>>> 
>>>>> Ok. But it was doing that for a long time. more than 30 mins.??
>>>>> Thanks
>>>>> Abhishek Majumdar
>>>>> 
>>>>> On 12/8/2010 9:00 PM, Kyriakos Zarifis wrote:
>>>>>> 
>>>>>> Hi Abhishek,
>>>>>> 
>>>>>> nothing is necessarily wrong in what you're describing. NOX seems to 
>>>>>> have started and is waiting for switches to connect.
>>>>>> Running nox_core with the "-v" flag will give you more information about 
>>>>>> what's happening.
>>>>>> 
>>>>>> Zaku is fine. It's the current HEAD (master branch, and stable version)
>>>>>> 
>>>>>> On Wed, Dec 8, 2010 at 6:51 PM, <majum...@cse.unl.edu> wrote:
>>>>>> After installing everything properly, when i tried the following
>>>>>> "$./nox_core -i ptcp:6633 routing"
>>>>>> it got stuck in an infinite loop. it gave
>>>>>> "NOX0.8.0`full`beta (nox_core), compiled Dec 8 2010 19:22:19
>>>>>> Compiled with OpenFlow 0x01" and the prompt got stuck.
>>>>>> 
>>>>>> I'm using a Ubuntu10Vm, OpenFlow v1.0. Also while installing NOX
>>>>>> compatible with OpenFlow v1.0 when I did git branch -a, I got "* zaku"
>>>>>> instead of a "* master." I don't whether this is an issue or not, but
>>>>>> still this was something different from what is mentioned in the page and
>>>>>> so I wanted to let you know.
>>>>>> 
>>>>>> Please reply ASAP.
>>>>>> 
>>>>>> Thanks
>>>>>> Abhishek
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> nox-dev mailing list
>>>>>> nox-dev@noxrepo.org
>>>>>> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
>>>>>> 
>>>>> _______________________________________________
>>>>> nox-dev mailing list
>>>>> nox-dev@noxrepo.org
>>>>> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
>>>> 
>>>> 
>>>> _______________________________________________
>>>> nox-dev mailing list
>>>> nox-dev@noxrepo.org
>>>> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
>>>> 
>>>> 
>>> 
>>> 
>> 
>> 
>> _______________________________________________
>> nox-dev mailing list
>> nox-dev@noxrepo.org
>> http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org
>>   

_______________________________________________
nox-dev mailing list
nox-dev@noxrepo.org
http://noxrepo.org/mailman/listinfo/nox-dev_noxrepo.org

Reply via email to