Hi All,
Yes, I tried doing a component, but there is one problem. As long as
I understand the python component, it get a data packet and from that it get
some info and then progemas a flow.
In my case, All I need to do it program a flow in the switch using the NOX
where I say if it is from a particular port say "portA" with a mac
address"ab:cd:de:ef" and vlan "10" then forward it to "portB" on else flood
to all the ports. I am not sure we can just install flows into the box with
out getting a datat packet. The swith is a openflow hardware enabled switch.
Please let me know. If anybody has a sample flow it would be great. Please
do let me know.
Thanks and Regards
Kashyap
On Thu, May 26, 2011 at 4:41 PM, Baohua Yang <[email protected]> wrote:
> NOX doesn't provide a CLI, so you might have to write a APP to setup your
> routing rules.
> See here for more information of how to write a simple APP.
> http://noxrepo.org/noxwiki/
>
> On Thu, May 26, 2011 at 1:09 PM, kashyap TA <[email protected]> wrote:
>
>> Hi,
>> I am running nox on my linux machine and I have a openflow enabled
>> hardware switch. I am able to initiate a connection between the Nox
>> Controller and the hardware switch. I need to push some flows on to the
>> Switch from the NOX controller. Can I do that? and if so how ? I am not able
>> to find any help guide. I am new to Nox controller. Can some body help.
>>
>> I just need to push a flow which says, if the packet comes from a
>> particular port, push it out on a particular port.
>>
>>
>> Please do let me know.
>>
>>
>> Thanks and Regards
>> Kashyap
>> _______________________________________________
>> nox-dev mailing list
>> [email protected]
>> http://noxrepo.org/mailman/listinfo/nox-dev
>>
>>
>
>
> --
> Best wishes!
> Baohua
>
>
_______________________________________________
nox-dev mailing list
[email protected]
http://noxrepo.org/mailman/listinfo/nox-dev
