When you say got stuck I'm guessing you mean with the bind error? Try doing netstat -an | grep XXXX <-- port number
This will tell you if the socket is already in use. Aaron On Mon, Aug 15, 2011 at 1:35 PM, Mariam Muntaha < 08bicsemmunt...@seecs.edu.pk> wrote: > Srini Seetharaman <seethara <at> stanford.edu> writes: > > > > > Looks like some other application is already using port 6633. Please > > see if there are other NOX processes already running. To use a > > different port XXXX, please run as follows: "./nox_core -i ptcp:XXXX" > > > > Srini. > > > > On Sun, Aug 14, 2011 at 5:13 PM, Mariam <08bicsemmuntaha <at> > seecs.edu.pk> > wrote: > > > Hi! > > > i'm coding layer-3 forwarder/switch controller but every time i run it > i got > > > following error > > > 00042|nox|ERR:bind: Address already in use > > > any ideas? > > > > > > _______________________________________________ > > > nox-dev mailing list > > > nox-dev <at> noxrepo.org > > > http://noxrepo.org/mailman/listinfo/nox-dev > > > > > > What i was doing is this " ./nox_core -v -i ptcp: pytutorial" > I'm new to openflow and python so i don't understand it much..:( > when i did "./nox_core -v -i ptcp:6635 pytutorial" > then it made no difference and > when i entred this "./nox_core -v -i ptcp:6635" > then it just got stuck. > > > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev > -- Aaron O. Rosen Masters Student - Network Communication 306B Fluor Daniel
_______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev