Hi guys, Im trying to test the Qos Rate-Limiting of Kernel vSwitch, i use iperf as my measurement tool. Everything is working fine with TCP part,that is, after i limit rate of one port to, say 50Mbps, the rate is limited to 50Mbps correctly and packets are tranferred 100%. But when i turn to UDP part,i ran into problems.I have to limit bandwidth to at most 4Mbps in order to tranfer 100% packets.And if i use bandwidth more than 4Mbps, the lost packets increase, the worst packet lost percentage is almost 99%.
Firstly i thought it is iperf's problem, so i tried to run iperf in normal network,i set bandwidth to 50Mbps, and things work fine. So can anyone give me some ideas where the problem might be? regards, Shan _______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
