Use unix command "diff -C 2" to find the differences between the scripts
> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Ashraf Bourawy > Sent: quarta-feira, 15 de Março de 2006 22:58 > To: Mohammad Abdul Awal > Cc: [email protected] > Subject: Re: [ns] wireless node connection with a physical link > > > Dear Mohammed, > > please have a look at the following tcl script,,,,it is yours old script > after making some changes,,,,,,,,,,,,,,it should work with you properly > now,,,,,,,try to find differences between this script and the original > script you submitted,,,,,,,,,,As for traffic visualization in nam it is > not > supported yet,,,,,,,, > In addition, please look at Marc Greis' tutorial at > http://www.isi.edu/nsnam/ns/tutorial/ it is very useful though,,,,,,,, > > Best regard, > Ashraf. > > > > # mohammed.tcl > # this is a simple wireless scenario > # ===================================== > > set ns_ [new Simulator] > > # > ========================================================================== > # Define Options > # > ========================================================================== > set val(chan) Channel/WirelessChannel ;# channel type > set val(prop) Propagation/TwoRayGround ;# radio-propagation > model > set val(netif) Phy/WirelessPhy ;# network > interface type > set val(mac) Mac/802_11 ;# MAC type > set val(ifq) Queue/DropTail/PriQueue ;# interface queue > type > set val(ll) LL ;# > link > layer type > set val(ant) Antenna/OmniAntenna ;# Antenna Model > set val(ifqlen) 50 ;# max > packets in ifq > set val(nn) 2 ;# > number > of mobiles > set val(rp) DSDV ;# routing > protocol > set val(x) 700 ;# X > dimension of topology > set val(y) 700 ;# Y > dimension of topology > > # > ========================================================================== > = > > $ns_ use-newtrace > set tf [open unicast.tr w] > $ns_ trace-all $tf > > set nf [open unicast.nam w] > $ns_ namtrace-all-wireless $nf $val(x) $val(y) > > # set up topology > # ======================================= > # > set topo [new Topography] > $topo load_flatgrid $val(x) $val(y) > > # Create god > # ======================================= > # > create-god $val(nn) > > # create a new channel > set chan1_ [new $val(chan)] > > # ================================================= > # Configure Nodes > # ================================================= > $ns_ node-config -adhocRouting $val(rp) \ > -llType $val(ll) \ > -macType $val(mac) \ > -ifqType $val(ifq) \ > -ifqLen $val(ifqlen) \ > -antType $val(ant) \ > -propType $val(prop) \ > -phyType $val(netif) \ > -channel $chan1_ \ > -topoInstance $topo \ > -agentTrace ON \ > -routerTrace OFF \ > -macTrace OFF \ > -movementTrace OFF > > # ===================================================== > # Create nodes > # ===================================================== > > for {set i 0} {$i < $val(nn) } {incr i} { > set node_($i) [$ns_ node] > $node_($i) random-motion 0 ;# disable random motion > } > > # ===================================================== > # Provide nodes with initial co-ord > # ===================================================== > > $node_(0) set X_ 100.0 > $node_(0) set Y_ 50.0 > $node_(0) set Z_ 0.0 > > $node_(1) set X_ 300.0 > $node_(1) set Y_ 50.0 > $node_(1) set Z_ 0.0 > > > # ====================================================== > # define mobiles initial position for nam > # ====================================================== > for {set i 0} {$i < $val(nn)} {incr i} { > > $ns_ initial_node_pos $node_($i) 20 > } > > # ====================================================== > # define simple movement for nodes > # ====================================================== > # nodes move away from each other > # > $ns_ at 10.0 "$node_(0) setdest 30.0 50.0 10.0" > $ns_ at 11.0 "$node_(1) setdest 400.0 50.0 15.0" > > # > # nodes move towards each other > # > $ns_ at 60.0 "$node_(0) setdest 120.0 50.0 10.0" > $ns_ at 61.0 "$node_(1) setdest 300.0 50.0 15.0" > > > # ===================================================== > # set up traffic flow between nodes > # ===================================================== > > set sender [new Agent/TCP] > $sender set class_ 1 > set rcver [new Agent/TCPSink] > > $ns_ attach-agent $node_(0) $sender > $ns_ attach-agent $node_(1) $rcver > > set ftp [new Application/FTP] > $ftp attach-agent $sender > > $ns_ connect $sender $rcver > $ns_ at 1.0 "$ftp start" > > # ==================================================== > # tell nodes when simulation ends > # ==================================================== > > for {set i 0} {$i < $val(nn) } {incr i} { > $ns_ at 100.0001 "$node_($i) reset" > } > > # ==================================================== > # Stop Traffic > # ==================================================== > $ns_ at 100.0002 "$ftp stop" > > > $ns_ at 100.0005 "puts \"NS EXITING...\" ; $ns_ halt" > > $ns_ at 100.0004 "stop" > > proc stop { } { > global ns_ tf nf > $ns_ flush-trace > close $tf > close $nf > } > > # ==================================================== > # Run simulation > # ==================================================== > puts "Starting Simulation..." > $ns_ run
