hi
I run the following script:
# Define options
#
======================================================================
set val(chan) Channel/WirelessChannel ;# channel type
set val(prop) Propagation/TwoRayGround ;# radio-propagation
model
set val(netif) Phy/WirelessPhy ;# network interface
type
set val(mac) Mac/802_11 ;# MAC type
set val(ifq) Queue/DropTail/PriQueue ;# interface queue
type
set val(ll) LL ;# link layer type
set val(ant) Antenna/OmniAntenna ;# antenna model
set val(ifqlen) 50 ;# max packet in ifq
set val(nn) 2 ;# number of
mobilenodes
set val(rp) TORA ;# routing protocol
#
======================================================================
# Main Program
#
======================================================================
#
# Initialize Global Variables
#
set ns_ [new Simulator]
set tracefd [open simple.tr w]
$ns_ trace-all $tracefd
# set up topography object
set topo [new Topography]
$topo load_flatgrid 500 500
#
# Create God
#
create-god $val(nn)
#
# Create the specified number of mobilenodes [$val(nn)] and "attach"
them
# to the channel.
# Here two nodes are created : node(0) and node(1)
# configure node
$ns_ node-config -adhocRouting $val(rp) \
-llType $val(ll) \
-macType $val(mac) \
-ifqType $val(ifq) \
-ifqLen $val(ifqlen) \
-antType $val(ant) \
-propType $val(prop) \
-phyType $val(netif) \
-channelType $val(chan) \
-topoInstance $topo \
-agentTrace ON \
-routerTrace ON \
-macTrace OFF \
-movementTrace OFF
for {set i 0} {$i < $val(nn) } {incr i} {
set node_($i) [$ns_ node]
$node_($i) random-motion 0 ;# disable
random motion
}
#
# Provide initial (X,Y, for now Z=0) co-ordinates for mobilenodes
#
$node_(0) set X_ 5.0
$node_(0) set Y_ 2.0
$node_(0) set Z_ 0.0
$node_(1) set X_ 390.0
$node_(1) set Y_ 385.0
$node_(1) set Z_ 0.0
#
# Now produce some simple node movements
# Node_(1) starts to move towards node_(0)
#
$ns_ at 50.0 "$node_(1) setdest 25.0 20.0 15.0"
$ns_ at 10.0 "$node_(0) setdest 20.0 18.0 1.0"
# Node_(1) then starts to move away from node_(0)
$ns_ at 100.0 "$node_(1) setdest 490.0 480.0 15.0"
# Setup traffic flow between nodes
# TCP connections between node_(0) and node_(1)
set tcp [new Agent/TCP]
$tcp set class_ 2
set sink [new Agent/TCPSink]
$ns_ attach-agent $node_(0) $tcp
$ns_ attach-agent $node_(1) $sink
$ns_ connect $tcp $sink
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns_ at 10.0 "$ftp start"
#
# Tell nodes when the simulation ends
#
for {set i 0} {$i < $val(nn) } {incr i} {
$ns_ at 150.0 "$node_($i) reset";
}
$ns_ at 150.0 "stop"
$ns_ at 150.01 "puts \"NS EXITING...\" ; $ns_ halt"
proc stop {} {
global ns_ tracefd
$ns_ flush-trace
close $tracefd
}
puts "Starting Simulation..."
$ns_ run
but there this error:
" for { set i 0 } {$i < $val(nn) } {incr i} {
set node_($i) [$ns_node]
$node_($i) random-motion 0
}"
( file "simple-wireless.tcl" line 93)
when using other protocol such as DSDV or AODV
this error is not found
and run is correct
please help me
---------------------------------
It's here! Your new message!
Get new email alerts with the free Yahoo! Toolbar.
