Hi,
I want to know what is the data rate corresponding for the default
parameters setting of 802.11p
this is the code fragment of setting default parameters of 802.11p
Phy/WirelessPhyExt set CSThresh_ 3.162e-12 ;#-85 dBm
Wireless interface sensitivity (sensitivity defined in the standard)
Phy/WirelessPhyExt set Pt_ 0.001
Phy/WirelessPhyExt set freq_ 5.9e+9
Phy/WirelessPhyExt set noise_floor_ 1.26e-13
;#-99 dBm for 10MHz bandwidth
Phy/WirelessPhyExt set L_ 1.0
;#default radio circuit gain/loss
Phy/WirelessPhyExt set PowerMonitorThresh_ 6.310e-14 ;#-102dBm
power monitor sensitivity
Phy/WirelessPhyExt set HeaderDuration_ 0.000040 ;#40 us
Phy/WirelessPhyExt set BasicModulationScheme_ 0
Phy/WirelessPhyExt set PreambleCaptureSwitch_ 1
Phy/WirelessPhyExt set DataCaptureSwitch_ 0
Phy/WirelessPhyExt set SINR_PreambleCapture_ 2.5118; ;# 4 dB
Phy/WirelessPhyExt set SINR_DataCapture_ 100.0; ;# 10 dB
Phy/WirelessPhyExt set trace_dist_ 1e6 ;#
PHY trace until distance of 1 Mio. km ("infinty")
Phy/WirelessPhyExt set PHY_DBG_ 0
Mac/802_11Ext set CWMin_ 15
Mac/802_11Ext set CWMax_ 1023
Mac/802_11Ext set SlotTime_ 0.000013
Mac/802_11Ext set SIFS_ 0.000032
Mac/802_11Ext set ShortRetryLimit_ 7
Mac/802_11Ext set LongRetryLimit_ 4
Mac/802_11Ext set HeaderDuration_ 0.000040
Mac/802_11Ext set SymbolDuration_ 0.000008
Mac/802_11Ext set BasicModulationScheme_ 0
Mac/802_11Ext set use_802_11a_flag_ true
Mac/802_11Ext set RTSThreshold_ 2346
Mac/802_11Ext set MAC_DBG 0
thanks in advance
--
View this message in context:
http://old.nabble.com/Setting-parametrs-for-802.11p-tp26496819p26496819.html
Sent from the ns-users mailing list archive at Nabble.com.
