Hi everyone, I am trying to reproduce the simulations results of AOMDV paper. I followed the same parameters described in the paper, which are listed below: 1. Network size: 1000m*1000m 2. Number of nodes: 100 nodes 3. Radio transmission range: 250m 4. Channel bit rate: 2Mb/s 5. 50 CBR/UDP connections; each connection strats at a random time during the intial 100s of the simulation and stay till the end 6. Packet size: 512 bytes 7. Packet rate: 1 packets/s 8. Simulation time: 1000s with the inital 250s taken as the warmup period
Moreover, according to AOMDV paper, I also disabled expanding ring search and local repair, and enabled periodic hello messages for neighborhood information maintenance by disabling link layer detection. Based on the above parameters, I ran simulations for AODV in varying node speed (from 1 m/s to 30 m/s). I got the packet loss from 6.14% to 54%. However, the latency (or end-to-end delay) is very low (below 0.11s). It is not reasonable. So, could anyone tell me what are the problems I encountered? Thanks in advance. Charley Cheng -- View this message in context: http://old.nabble.com/Performance-of-AODV-tp27844400p27844400.html Sent from the ns-users mailing list archive at Nabble.com.