Thanks Hossan but what's the reason for this error: Client 3: Handoff Attempted Client 14: Handoff Attempted Client 5: Handoff Attempted Client 15: Handoff Attempted Client 0: Handoff Attempted Client 22: Handoff Attempted Client 17: Handoff Attempted Client 25: Handoff Attempted Client 19: Handoff Attempted Client 30: Handoff Attempted Client 13: Handoff Attempted Client 9: Handoff Attempted Client 16: Handoff Attempted Client 12: Handoff Attempted Client 2: Handoff Attempted Client 6: Handoff Attempted Client 4: Handoff Attempted Client 20: Handoff Attempted Client 1: Handoff Attempted Client 11: Handoff Attempted Client 10: Handoff Attempted Client 27: Handoff Attempted Client 18: Handoff Attempted
--- On Sun, 25/7/10, Hoda Hassan <mhel...@aucegypt.edu> wrote: From: Hoda Hassan <mhel...@aucegypt.edu> Subject: Re: [ns] Unusual Error: Plssss helpppppp!!!!!!!! To: "ikenna ajere" <ajer...@yahoo.co.uk> Date: Sunday, 25 July, 2010, 4:10 I am not very good with ns2 but as far as my knowledge goes the problem is with the setdest command try to run the script with preset coordinates first to make sure that there is no problem with the script itself then check if the coordinates used by the setdest are within the topology size that you specified and check if the command is written correctly it seems that the arguments used for setdest are not correct. My advice with ns2 start with a very simple script that works and add to it little by little so that you can trace where the error is if you encounter one. Good Luck On Jul 25, 2010, at 11:37 AM, ikenna ajere wrote: > > Plssss I'm still waiting > Any helpwill be appreciated plssssss > --- On Sun, 25/7/10, ikenna ajere <ajer...@yahoo.co.uk> wrote: > > From: ikenna ajere <ajer...@yahoo.co.uk> > Subject: [ns] Unusual Error: Plssss helpppppp!!!!!!!! > To: ns-users@ISI.EDU > Date: Sunday, 25 July, 2010, 0:12 > > > > Plsss I'm getting this error while running a .tcl script. I use DSDV or AODV > routing protocol. > > who can help me resolve it? > > um_nodes is set 31 > warning: Please use -channel as shown in tcl/ex/wireless-mitf.tcl > INITIALIZE THE LIST xListHead > Loading first scenario file... > Loading second scenario file... > Loading second scenario file... > Starting Simulation... > ns: _o14 setdest 139.67597164116808 401.38816034668594 0.5627328791824573: > (_o14 cmd line 1) > invoked from within > "_o14 cmd setdest 139.67597164116808 401.38816034668594 0.5627328791824573" > invoked from within > "catch "$self cmd $args" ret" > invoked from within > "if [catch "$self cmd $args" ret] { > set cls [$self info class] > global errorInfo > set savedInfo $errorInfo > error "error when calling class $cls: $args" $..." > (procedure "_o14" line 2) > (SplitObject unknown line 2) > invoked from within > "_o14 setdest 139.67597164116808 401.38816034668594 0.5627328791824573" > ike...@ikenna-laptop:~/Desktop/searchtest1aodv$ ns search1.tcl > num_nodes is set 31 > warning: Please use -channel as shown in tcl/ex/wireless-mitf.tcl > INITIALIZE THE LIST xListHead > Loading first scenario file... > Loading second scenario file... > Loading second scenario file... > Starting Simulation... > ns: _o14 setdest 139.67597164116808 401.38816034668594 0.5627328791824573: > (_o14 cmd line 1) > invoked from within > "_o14 cmd setdest 139.67597164116808 401.38816034668594 0.5627328791824573" > invoked from within > "catch "$self cmd $args" ret" > invoked from within > "if [catch "$self cmd $args" ret] { > set cls [$self info class] > global errorInfo > set savedInfo $errorInfo > error "error when calling class $cls: $args" $..." > (procedure "_o14" line 2) > (SplitObject unknown line 2) > invoked from within > "_o14 setdest 139.67597164116808 401.38816034668594 0.5627328791824573" > > > > > > > > > > > > >