[nsbasic-ce] Re: Not able to Display a .gif file with NSCEPictureBox.NSCEPictureBoxCtrl.1

[bwolodko]

The device is a CuWin3500 with CE 5.0 Pro installed

Processor 32-bit RISC (ARM920T Core) - 266MHz
Memory RAM: 64MB, NAND Flash: 64MB, NOR Flash: 1MB
LCD CUWIN3200/3500 : 7" TFT, 
18-bit / 260k colors, 800 x 480 pixels, LED backlight
Touch Four wire resistive panel
Serial (2) RS232-only, (1) RS232/RS485 switchable
USB (1) host interface, (1) device interface
Storage SD card Flash memory slot (up to 2GB)
Sound Internal mono speaker, external 3.5mm stereo jack
Clock Internal realtime clock
Power DC 9V to 24V, 500mA

I can view both jpg's, bmp's and gif's using the CuWin's Internet Explorer, by 
opening the explorer, and selecting the jpg of gif etc. 

If I double click the gif, I get a dialog saying " There is no application 
associated with 'pic.gif' Run the application first, then open the file from 
within the application"

Any thoughts?

Thanks 

Ben 


--- In nsbasic...@yahoogroups.com, "George Henne" <g...@...> wrote:
>
> What device are you running on?
> 
> 
> >
> >Setting the variable to a .bmp file will show correctly
> >
> >trying to set it to any other format, the picture doesnot show
> >
> >MSR(0) = "\Storage Card\GeoSplash\GeotirBlk.bmp"
> >shows OK
> >
> >MSR(0) = "\Storage Card\GeoSplash\geotir1.gif"
> >Shows a blank area set by the NSCEPictureBox.NSCEPictureBoxCtrl.1 object
> >
> >Code that I am using:
> >
> >
> >AddObject "NSCEPictureBox.NSCEPictureBoxCtrl.1","GeoL",60,40,411,160
> >GeoL.ImageLoadBufferSize = 4096 ' added this from tech note 13
> >GeoL.ScaleMode = 3 ' pixels
> >GeoL.BorderStyle = 0 ' none
> >GeoL.Picture = MSR(0)
> >
> >
> >The .gif file is 411 pixels wide x 160 pixels high
> >
> >Any suggestions?
> >
> >Thanks
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>



--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"nsb-ce" group.
To post to this group, send email to nsb-ce@googlegroups.com
To unsubscribe from this group, send email to 
nsb-ce+unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/nsb-ce?hl=en
-~----------~----~----~----~------~----~------~--~---