If you're using 8.1, there is no need to install Basic.WM.exe. Check the ReadMe.
Controls are normally installed on the device by adding them as resources. >8.1 > >-----Original Message----- >From: [email protected] [mailto:[email protected]] On >Behalf Of George Henne >Sent: Friday, February 26, 2010 10:12 AM >To: [email protected] >Subject: Re(2): [nsbasic-ce] Re: help with fileSystem error > >What version of NS Basic are you currently using? > >>Apparently the root of this error was that I had Basic.WinCE.exe installed >>instead of Basic.WM.exe. Changing this got rid of the 126 error. Things are >>now improving. >> >>Next Problem >> >>Sub CEF030_Load >> >> AddObject "newObjects.utilctls.SFMain", "fs" >> filename = "\Documents and Settings\AcuTrack\pdaPickList.txt" >> file = fs.OpenFile(filename) >> loadListBox >> >>End Sub >> >>I get error "object doesn't support this property or method:'file'" >>This is a normal .txt file which notepad and explore on the PDA can >display. >> >>What does this error mean? >> >>Thanks >> >> >>-----Original Message----- >>From: [email protected] [mailto:[email protected]] On >>Behalf Of George Henne >>Sent: Friday, February 26, 2010 9:16 AM >>To: [email protected] >>Subject: Re: [nsbasic-ce] Re: help with fileSystem error >> >>When do you get this error? >> >>You are correct - there was an error in the samples in Tech Note 9. It >>has been corrected. >> >>>NO luck. >>> >>>OK I'm trying to use new file system. >>> >>>Sub CEF030_Load >>> >>> ' clipped from example tech note 9 >>> AddObject "newObjects.utilctls.SFMain", "Main" >>> filename = "\My Documents\AcuTrack\pdaPickList.txt" >>> myExtensionName = FS.GetExtensionName(filename) 'result is ".txt" >>> MsgBox myExtensionName >>> >>>End Sub >>> >>>I get error 126, so I still have some setup error. Help appreciated. >>>And should not myExtensionName = Main.GetExt......?? >>> >>> >>>--- In [email protected], "joespan123" <j...@...> wrote: >>>> >>>> Hi, >>>> >>>> Try adding the "filesystem" and "file" object outside of the Load event. >>>> >>>> Add it as first line in your global code. >>>> >>>> Cheers >>>> Joe >>>> >>>> --- In [email protected], "georgeewalters" <gwalters@> wrote: >>>> > >>>> > Using this code >>>> > >>>> > Sub CEF030_Load >>>> > AddObject "filesystem" >>>> > AddObject "file" >>>> > filename = "\My Documents\pdaPickList.txt" >>>> > file.Open filename,4,3,3,124 'direct, read/write, locked, reclen >>>> > End Sub >>>> > >>>> > I get an AddObject error: >>>> > >>>> > Could not create non-visual control ("filesystem") because >>>IClassFactory coult not be obtained. >>>> > >>>> > I must have something setup wrong or missing on this new iPAC 211(WM >>>5.2). Any help would be appreciatied. >>>> > >>>> >>> >>> >>> >>> >>>------------------------------------ >>> >>>Yahoo! Groups Links >>> >>> >>> >> >> >> >>------------------------------------ >> >>Yahoo! Groups Links >> >> >> >> >> >> >>------------------------------------ >> >>Yahoo! Groups Links >> >> >> > > > >------------------------------------ > >Yahoo! Groups Links > > > > > >------------------------------------ > >Yahoo! Groups Links > > > -- You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
