8.1.2a
--- In nsbasic-ce@yahoogroups.com, "George Henne" <g...@...> wrote:
>
> You need to make sure the NewObjects control is on the device.
>
> What version of NS Basic/CE are you using?
>
> >I would like some help on this as well.
> >When i modify the code from Tech Note 3
> >
> >AddObject "newObjects.utilctls.SFMain", "FS"
> >FS.CopyFile("ABC.txt","\Program\DEF.txt")
> >
> >I get an error message saying
> >"Microsoft VBScript runtime error.....char 0 File name or class name not
> >found during automation operation"
> >
> >I thought copying it from the tech note would be pretty straight
> >forward. though I was wrong.
> >
> >
> >--- In nsbasic-ce@yahoogroups.com, "bwolodko" <ben.wolodko@> wrote:
> >>
> >> Nathan,
> >> here is a Code Snippet for copying files from an SD card on the
> >CuWin3500 device to a USB stick plugged into the CuWin3500.
> >>
> >> This code was written using NSBasic 7.0.5 and Uses the old Windows
> >File and filesystem Dll's
> >>
> >> I left out some Dim statements for the variables
> >> and Addobject picture elements.
> >>
> >> This is just to show you the flow. This will not run as is
> >>
> >> Code Start
> >>
> >> Option Explicit
> >> ShowOKButton True 'Set minimize button URHC to close app
> >>
> >> ' make full screen hide taskbar and top menu
> >> ' Screen is 800 x 480
> >> Dim hWnd
> >> Dim nWidth
> >> Dim nHeight
> >> Dim bRepaint
> >> Declare "Function GetForegroundWindow Lib ""Coredll"" () As Long"
> >> Declare "Function MoveWindow Lib ""Coredll"" (ByVal hWnd As Long,
> >ByVal x As Long, ByVal y As Long, ByVal nWidth As Long, ByVal nHeight As
> >Long, ByVal bRepaint As Long) As Long"
> >> hWnd = GetForegroundWindow
> >> MoveWindow hWnd, 0, -26, Output.Width, 506, True ' 26 and 506
> >> ' need To hide the taskbar On Cuwin using a mouse in the USB port
> >> Output.BackColor = &H00000000& ' Black background
> >>
> >>
> >> Dim SrcePath ' "\Storage Card\SIDData\"
> >> Dim SrceFName' "STID*.Txt"
> >>
> >> Dim DestPath ' "\Hard Disk\SIDData\"' Subdirectory on the USB Drive,
> >must be there to prevent an error
> >> Dim DestFName '= DestPath & FLName
> >> Dim FileCount ' Count number of Station ID Data Files
> >> Dim Source ' "\Storage Card\SIDData\STID*.Txt"
> >> Dim DataDir ' filesystem.dir(Source)
> >> Dim FLLen ' Len(DataDir) ' is this the length of the file only?
> >> Dim FLName ' Mid(DataDir,28,FLLen - 28))
> >> Dim DestFileTest
> >>
> >>
> >>
> >> ' File System object to Copy Data Files to USB Hard Drive
> >> AddObject "FileSystem", "FileSystem", 0, 0, 0, 0
> >> AddObject "FileSystem", "FileSystem1", 0, 0, 0, 0
> >>
> >> ' File object to open/read/write Default and Station ID Data Files
> >> AddObject "file"
> >>
> >> ' ------------------------------------------------------
> >> Sub USBTransferScreen
> >>
> >> ' Called in Dpic1_Click to transfer data to USB Stick
> >> ScreenHeader.Picture = PathDeflt & DfVHdr ' Gaea ... Powder Counter
> >Default Values
> >>
> >> ' Subdirectory on the SD Card
> >> SrcePath = "\Storage Card\SIDData\"
> >> SrceFName = "STID*.Txt"
> >> ' Subdirectory on the USB Drive, must be there to prevent an error
> >> DestPath = "\Hard Disk\SIDData\"
> >>
> >> 'filesystem.FileCopy PathName, NewPathName
> >>
> >> FileCount = 1
> >> Source = "\Storage Card\SIDData\STID*.Txt"
> >>
> >> DataDir = filesystem.dir(Source)
> >> SrceFName = SrcePath & DataDir
> >> DestFName = DestPath & DataDir
> >> Call USBFileCopy
> >>
> >> If DestFileTest = "" Then ' check to see if USB Drive is plugged in
> >> Exit Sub
> >> End If
> >>
> >> While (DataDir <> "")
> >> DataDir = fileSystem.Dir() ' each time envoked brings up a new file
> >> If DataDir <> "" Then
> >> SrceFName = SrcePath & DataDir
> >> DestFName = DestPath & DataDir
> >> FileCount = FileCount +1
> >> Call USBFileCopy
> >> End If
> >> WEnd
> >>
> >> Dpic1.picture = PathDeflt & DefPicR(1) ' TURN "Upload to USB Drive"
> >Button background red
> >> USBOperatorDone.show ' show the Done Button "Sub USBOperatorDone_click"
> >>
> >> End Sub
> >>
> >> ' --------- Copy files from the SD Card to the USB Stick
> >--------------------
> >> Sub USBFileCopy
> >> ' Test if the USB Hard Disk is plugged in
> >>
> >> DestFileTest = FileSystem1.Dir("\Hard Disk\USBCheck.dat")
> >> If DestFileTest = "" Then
> >> Mpic6.DrawText " "
> >> Mpic6.DrawText "USB Drive Error"
> >> Mpic6.DrawText "No USB Device"
> >> Mpic6.DrawText "Insert USB Drive "
> >> Mpic6.DrawText "and Try Again... "
> >> USBOperatorDone.show
> >> UpdateScreen
> >> Exit Sub
> >> End If
> >>
> >> Mpic6.move 360,75,420,275 ' no next of back buttons
> >> Mpic6.TransparentColor = -1
> >> Mpic6.BackColor = BlueBackColor
> >> Mpic6.Cls
> >> Mpic6.FontBold = True
> >> Mpic6.FontSize = 30
> >> Mpic6.ForeColor = &H0000FFFF&
> >> Mpic6.show
> >> Mpic6.DrawText FileCount & " Data Files"
> >> Mpic6.DrawText "Copying ..."
> >> Mpic6.DrawText SrcePath
> >> Mpic6.DrawText DataDir
> >> Mpic6.DrawText "to USB Drive"
> >> Mpic6.DrawText DestPath
> >>
> >> UpdateScreen
> >>
> >> 'Test If the file does Not exist yet
> >> If (FileSystem1.Dir(DestFName) = "") Then
> >> ' Then we can copy the file
> >> FileSystem.FileCopy (SrceFName), (DestFName)
> >> ElseIf (FileSystem1.Dir(DestFName) <> "") Then
> >> Mpic6.DrawText " "
> >> Mpic6.DrawText "File Exists on Destination"
> >> UpdateScreen
> >> End If
> >>
> >> End Sub
> >> Code Stop
> >>
> >> This project was Formless, and 95 elemets were picture elements
> >> i.e.
> >> AddObject "NSCEPictureBox.NSCEPictureBoxCtrl.1","GeoL",60,40,400,150
> >>
> >> Then use GeoL.hide and GeoL.show to hide and show specific elements at
> >specific times and events. Use _Click events to move through the program
> >>
> >> All objects were created using AddObject, no toolbox objects were
> >used, because this was Formless.
> >> All variables Dim'ed first, then all objects created and hidden, then
> >specific objects shown, then using Click events, to run the program.
> >>
> >> Program contained 4550 lines,
> >>
> >> NSBasic ultimately worked well, but not without it's frustrations.
> >>
> >> There is a learning curve, as with any programming language.
> >>
> >> Hope this helps.
> >>
> >> Ben
> >>
> >>
> >> --- In nsbasic-ce@yahoogroups.com, "rmrsoft" <alan@> wrote:
> >> >
> >> > Yes, that is what I meant. I am not aware of the boolean operator
> >but you could be right.
> >> >
> >> > --- In nsbasic-ce@yahoogroups.com, epankoke@ wrote:
> >> > >
> >> > > The tech note may not specifically show code for copy, but if you
> >look at the Methods list for the file object, there is a method called
> >FileCopy. If I had to guess, the parameters would be FileToCopyFrom,
> >FileToCopyTo, and possibly an optional boolean to specify whether to
> >fail or overwrite if the destination already exists.
> >> > >
> >> > >
> >> > > ----- Original Message -----
> >> > > From: "Nathan" <eeepc904@>
> >> > > To: nsbasic-ce@yahoogroups.com
> >> > > Sent: Friday, March 5, 2010 4:42:17 AM GMT -05:00 US/Canada Eastern
> >> > > Subject: [nsbasic-ce] Re: Copy Files
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > The third Tech Note doesn't cover Copy, only append, ... :(
> >> > >
> >> > > --- In nsbasic-ce@yahoogroups.com , "rmrsoft" <alan@> wrote:
> >> > > >
> >> > > > It's all covered in Tech Note 3e
> >> > > >
> >> > > >
> >> > > > --- In nsbasic-ce@yahoogroups.com , "Nathan" <eeepc904@> wrote:
> >> > > > >
> >> > > > > I don't like to be..., but someone can help me?
> >> > > > >
> >> > > > > --- In nsbasic-ce@yahoogroups.com , "Nathan" <eeepc904@> wrote:
> >> > > > > >
> >> > > > > > Hello,
> >> > > > > > I want to know how to copy files with NSBasic/CE 7.0
> >> > > > > >
> >> > > > > > Best Regards,
> >> > > > > > Nathan Paulino Campos
> >> > > > > >
> >> > > > >
> >> > > >
> >> > >
> >> >
> >>
> >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>
--
You received this message because you are subscribed to the Google Groups
"nsb-ce" group.
To post to this group, send email to nsb...@googlegroups.com.
To unsubscribe from this group, send email to
nsb-ce+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/nsb-ce?hl=en.
