Could you send it directly to me at support (at) nsbasic.com? George Henne NS BASIC Corporation http://www.nsbasic.com
>[Attachment(s) from Kurt Goszyk - iPREP included below] > >Hi George, >Attached is a sample program that exhibits the behavior. I've included >the .exe, installers and the nsb source. > >This was compiled with NSBasic 8.0 and ran successfully on the >FriendlyArm board with WinCE5.0 and 3.5 display. I learned that they >changed to another 3.5" display vendor and redid the BSP and created >their updated WinCE5.0. Now, when trying to run my sample program, I get >a "Cannot find NSBasic.exe" error message. > >When compiling the NSB source, I use the default install folders selection. >Kurt > >From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >Behalf Of George Henne >Sent: Monday, March 28, 2011 2:19 PM >To: nsbasic-ce@yahoogroups.com >Subject: Re(14): [nsbasic-ce] Cannot find NSBasic.exe > > >Could you send me the .exe? > >> >> >>Once installed, I go to the folder the app is in and double tap the .exe >>icon to run. >> >>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>Behalf Of George Henne >>Sent: Monday, March 28, 2011 1:58 PM >>To: nsbasic-ce@yahoogroups.com >>Subject: Re(12): [nsbasic-ce] Cannot find NSBasic.exe >> >> >>How are you starting your app? >> >>George Henne >>NS BASIC Corporation >>http://www.nsbasic.com >> >>> >>> >>>Yes I have. Maybe long shot, but only thing left is to try to re-compile >>>with updated NSBasic. >>> >>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>Behalf Of George Henne >>>Sent: Monday, March 28, 2011 1:24 PM >>>To: nsbasic-ce@yahoogroups.com >>>Subject: Re(10): [nsbasic-ce] Cannot find NSBasic.exe >>> >>> >>>Everything seems correct. I assume you have tried the other platform >>>settings, just in case? >>> >>>> >>>> >>>>It's set to: >>>>2577 - ARMV4/StrongARM/SA1100 >>>> >>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>Behalf Of George Henne >>>>Sent: Monday, March 28, 2011 12:43 PM >>>>To: nsbasic-ce@yahoogroups.com >>>>Subject: Re(8): [nsbasic-ce] Cannot find NSBasic.exe >>>> >>>> >>>>In Tools...Options, what is Platform set to? >>>> >>>>> >>>>> >>>>>Hi George, >>>>>Have tried everything at this point. Since I'm using NSBasic 8.0, how >>>>>can I get 8.1 or 8.2 to try to recompile my application for WinCE. >>>>>Kurt >>>>> >>>>> >>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>Behalf Of George Henne >>>>>Sent: Wednesday, March 09, 2011 10:50 AM >>>>>To: nsbasic-ce@yahoogroups.com >>>>>Subject: Re(6): [nsbasic-ce] Cannot find NSBasic.exe >>>>> >>>>> >>>>>(sorry I missed your earlier message) >>>>> >>>>>No ideas at this point - it just doesn't make sense. I assume you have >>>>>tried a hard reset? >>>>> >>>>>> >>>>>> >>>>>>Hi George. >>>>>>Using WinCE 5.0. Any thoughts? >>>>>>Kurt >>>>>> >>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>>Behalf Of George Henne >>>>>>Sent: Monday, March 07, 2011 12:32 PM >>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>Subject: Re(4): [nsbasic-ce] Cannot find NSBasic.exe >>>>>> >>>>>> >>>>>>What version of Windows CE? >>>>>> >>>>>>> >>>>>>> >>>>>>>No problem. The Device is a Friendly ARM 2440 board with ARM 9 Samsung >>>>>>>S3C2440AL-40. >>>>>>> >>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>>>Behalf Of George Henne >>>>>>>Sent: Monday, March 07, 2011 12:01 PM >>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>Subject: Re: Re(2): [nsbasic-ce] Cannot find NSBasic.exe >>>>>>> >>>>>>> >>>>>>>What is the device? >>>>>>> >>>>>>>What os is it running? >>>>>>> >>>>>>>Please excuse any typos. This message is sent from my mobile device. >>>>>>> >>>>>>>On Mar 7, 2011, at 11:53 AM, "Kurt Goszyk - iPREP" <k...@ipreppress.com> >>>>>>>wrote: >>>>>>> >>>>>>>The working app was created under NSBasic 8.0. Yes, I am using the >>>>>>>installer created by NS Basic/CE and am using the NSBasic 8.0 IDE. >>>>>>>Kurt >>>>>>> >>>>>>> >>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic-ce@yahoogroups.com] On >>>>>>>Behalf Of George Henne >>>>>>>Sent: Monday, March 07, 2011 11:33 AM >>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>Subject: Re(2): [nsbasic-ce] Cannot find NSBasic.exe >>>>>>> >>>>>>> >>>>>>>Which version of NS Basic/CE are you using? >>>>>>> >>>>>>>Are you installing using the installer created by NS Basic/CE? >>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>Hi George. >>>>>>>>Yes, several times with the same error message. >>>>>>>> >>>>>>>>From: nsbasic-ce@yahoogroups.com [mailto:nsbasic- c...@yahoogroups.com] On >>>>>>>>Behalf Of George Henne >>>>>>>>Sent: Monday, March 07, 2011 11:14 AM >>>>>>>>To: nsbasic-ce@yahoogroups.com >>>>>>>>Subject: Re: [nsbasic-ce] Cannot find NSBasic.exe >>>>>>>> >>>>>>>> >>>>>>>>Hi Kurt, >>>>>>>> >>>>>>>>Did you reinstall your app? >>>>>>>> >>>>>>>>George >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>Hi, >>>>>>>>>I have a working NSbasic application in WinCE5.0. I received an >updated >>>>>>>>>board with more program memory but same file structure and processor. >>>>>>>>>When I try to run my previously working app, I now get "Cannot find >>>>>>>>>NSBasic.exe. Please reinstall. >>>>>>>>> >>>>>>>>>What am I overlooking? thanks. >>>>>>>>> >>>>>>>>>Kurt Goszyk >>>>>>>>>iPREPpress LLC >>>>>>>>>www.ipreppress.com >>>>>>>>>k...@ipreppress.com >>>>>>>>>215-321-0447 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >> >> >> >> > > >Attachment(s) from Kurt Goszyk - iPREP > >1 of 1 File(s) > >CalcTest.zip > -- You received this message because you are subscribed to the Google Groups "nsb-ce" group. To post to this group, send email to nsb...@googlegroups.com. To unsubscribe from this group, send email to nsb-ce+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nsb-ce?hl=en.
