Hello NSD-Developers, the "ip-address" statement accept an interface name. NSD will listen on ip-addresses associated with that interface. That's nice.
But the same does not work for "control-interface". Is this intentional? server: ip-address: eth0 verbosity: 9 remote-control: control-enable: yes control-interface: eth1 [2021-02-13 20:11:25.801] nsd[104]: info: interface eth0 has address 192.0.2.53 [2021-02-13 20:11:25.801] nsd[104]: notice: nsd starting (NSD 4.3.5) [2021-02-13 20:11:25.801] nsd[104]: notice: listen on ip-address 192.0.2.53@53 (udp) with server(s): * [2021-02-13 20:11:25.801] nsd[104]: notice: listen on ip-address 192.0.2.53@53 (tcp) with server(s): * [2021-02-13 20:11:25.804] nsd[104]: error: control interface eth1:8952 getaddrinfo: Name or service not known [2021-02-13 20:11:25.804] nsd[104]: error: could not open remote control port [2021-02-13 20:11:25.804] nsd[104]: error: could not perform remote control setup Andreas _______________________________________________ nsd-users mailing list [email protected] https://lists.nlnetlabs.nl/mailman/listinfo/nsd-users
