Correct sir! Here is the info for those who care:
TCP/IP in Windows 2000 Professional
Configure Multiple Network Adapters or Media Types
Windows 2000 Professional places no restrictions on physically multihomed
computers, so you can add as many network adapters as the computer hardware
can accommodate, and assign each a separate address.
As each new network adapter is installed, Windows 2000 Plug and Play
autodetects the adapter. The device drivers for each adapter are installed,
and any internal resources are automatically configured. The network adapter
is bound to the TCP/IP protocol. If the network adapter is not Plug and Play
- compliant, the adapter software must be installed and configured manually,
using the manufacturer's instructions.
For a multihomed computer that uses multiple network adapters for physical
connections to the LAN, each adapter appears as a separate adapter in the
Network and Dial-up Connections folder.
For a system configured to support multiple network or media types, there
are no restrictions for this type of configuration other than hardware and
media support. Microsoft Windows 2000 TCP/IP supports the following:
Ethernet (Ethernet II and IEEE 802.3 SNAP encapsulation).
Token Ring (IEEE 802.5 encapsulation).
Asynchronous Transfer Mode (ATM).
Fiber Distributed Data Interface (FDDI).
WAN, using circuit-switched media such as ISDN and dial-up or dedicated
asynchronous lines and virtual-circuit wide-area media such as X.25 and
Frame Relay.
By default, each new network adapter is configured to use DHCP to assign an
IP address to it.
To manually configure IP addresses on a multihomed system
In Control Panel, double-click Network and Dial-up Connections.
Right-click the local area network connection you want to modify, and then
select Properties.
Add TCP/IP configuration information for the network adapter, as described
in "Configure IP Address Manually."
� 1985-2001 Microsoft Corporation. All rights reserved.
_____
Tom Uhlar
Tantivy Communications
Dept: Information Technology
Melbourne, Florida
Cell: 321.863.0171
_____
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Ryan Malayter
Sent: Monday, August 27, 2001 11:40 AM
To: NT 2000 Discussions
Subject: RE: How many NICs in a W2K Pro/server?
Widows 200 supports as many NICs as your hardware supports
-----Original Message-----
From: Tom Uhlar [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 27, 2001 9:13 AM
To: NT 2000 Discussions
Subject: How many NICs in a W2K Pro/server?
Test question: How many nics can one install in a Win2k Pro box?
How many nics does W2k Server support? (dont'
forget about 4 port cards from some vendors, which means that if W2K server
supports 4 nics, does it support 4 nics with 4 ports = 16 ports!!!???
_____
Tom Uhlar
Tantivy Communications
Dept: Information Technology
Melbourne, Florida
Cell: 321.863.0171
_____
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Szlucha, Chris
Sent: Monday, August 27, 2001 9:53 AM
To: NT 2000 Discussions
Subject: RE: Server Not Appearing in Browse List
We run TCP/IP only on our network. We are running NT4 SP6a on all domain
controllers. DNS running (Unix-based) and WINS. WINS replication is
working fine and this server shows up in WINS. I've run BrowMon and DomMon
but they aren't showing anything unusual. Our WINS in simple hub and spoke
with 4 spokes. All machines report to the spokes and replication is
controlled by the hub. This has been working fine for 3 years with regular
maintenance. And it's only my Win2K servers but not all of them. Really
bizarre. Especially since I can build two of them side-by-side, and one
will show up. The other won't. I'm really at a loss.
-----Original Message-----
From: Anthony L. Sollars [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 24, 2001 1:09 PM
To: NT 2000 Discussions
Subject: RE: Server Not Appearing in Browse List
What net protocols are you running on your network, and on this server? What
OS are your domain controllers? DNS or WINS or both? DO you have multiple
wins server and is replication completing succesfully between them? have you
run the "Browser Monitor" and "Domain Monitor" tools from the win2k resource
kit? Try these to see which systems have control of the master browser list
on your network. Anything in the logs? -Tony
-----Original Message-----
From: Szlucha, Chris [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 23, 2001 12:09 PM
To: NT 2000 Discussions
Subject: RE: Server Not Appearing in Browse List
No, the NIC is fine and everything else seems to be okay as far as
communicating on the network. This happens on quite a few of the new 2000
servers we build and, again, they are all built by 2 people using the same
build document and checklists. And it doesn't matter which person builds
them, it's sort of random which ones show up in Network Neighborhood.
-----Original Message-----
From: Anthony L. Sollars [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 23, 2001 12:56 PM
To: NT 2000 Discussions
Subject: RE: Server Not Appearing in Browse List
BAD NIC ?
-----Original Message-----
From: Szlucha, Chris [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 23, 2001 5:21 AM
To: NT 2000 Discussions
Subject: Server Not Appearing in Browse List
Anyone have any ideas on why I can build 10 Compaq member servers all the
same model, same build, on Win2K Server using the exact same steps from a
checklist, and when I put them on my existing NT 4.0 network, some of them
show up in the browse list, some don't. Doesn't matter what segment they
are on as I can put 2 on the same segment, my server segment, and one will
show, the other won't. I'm just baffled. I've searched Microsoft Premier
Support and Google, but can't find anything. I've tried the hack in the
registry that I use to use for NT 4, but that didn't seem to work either.
As a side note, One of them appeared for about a day, then disappeared. I've
turned the Browsing service on and left it on for a while. No change. I've
turned it off and left it off. No change.
?????????
Chris Sz
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
------
You are subscribed as [email protected]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
