What type of printer is it? It sounds like you are printing to it via TCP/IP. It has obtained a new IP (probably from your DHCP server) You need to go into the properties of the printer on the NT workstation and change the IP addres the printer driver is set to.
cheers dean -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, 25 January 2002 8:17 p.m. To: NT 2000 Discussions Subject: please be patient... i am not a network admin, i have lumped the duty of network stuff as we are a small setup so it's not that i am not doing my homework properly i just need to be pointed in the right direction for what reason would you not be able to see a printer on the network, b4 the printer re-assigned it'self a new IP addie it was working fine on this NT4 workstation, now it can't see the printer at all, even if it type the IP number in, i have TCP IP installed on the pc. If i look by hardware addie for the printer on my pc (we are connected to the same LAN) it find the printer, graned i can see it on the network, but if i do it on the other pc i can't, the pc is logged into the network and it able to see all other recourses and servers... any ideas? ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED] *************************************************** This e-mail is not an official statement of the Waikato Regional Council unless otherwise stated. Visit our website http://www.ew.govt.nz *************************************************** ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
