windows 2000
"Leonard Lee"
<[EMAIL PROTECTED]> To: "NT 2000 Discussions"
<[EMAIL PROTECTED]>
Sent by: cc:
bounce-nt2000-203418@ls Subject: RE: Connecting Remotely
to the network
.swynk.com
03/17/02 06:25 PM
Please respond to "NT
2000 Discussions"
You didn't say which OS you are using...
Basically, it sounds like you need to implement a VPN solution (Vertual
Private Network). A VPN solution will allow your users FULL access your
private network securely.
My choice would be:
PPTP - Point to Point Tunnel Protocol. This is part of NT 4.0 (ie. free
with NT)
P2TP - Layer 2 Tunnel Protocol. This is part of Windows 2000 (ie. Also free
with Windows 2000)
Read more about these solutions by search Microsoft's online technet
www.microsoft.com/technet
Hardware Solutions are better because they are better known to be dedicated
solutions. They are less suspectable to OS hackers, which WILL compremise
your VPN solution. However, a Hardware solution can also be hacked, but
less likely then an OS like Windows 2000 or NT.
Good Luck,
Leonard Lee
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Chinnery Paul
Sent: Friday, March 15, 2002 10:29 AM
To: NT 2000 Discussions
Subject: RE: Connecting Remotely to the network
But for cost, Martin, why not just run with PPTP? However, she didn't
mention whether they have an internet pipe with firewall.
Probably not as secure as a Cisco but pretty easy to set up and cheap.
Paul Chinnery
Network Administrator
Mem Med Ctr
-----Original Message-----
From: Martin Blackstone [mailto:[EMAIL PROTECTED]]
Sent: Friday, March 15, 2002 8:34 AM
To: NT 2000 Discussions
Subject: RE: Connecting Remotely to the network
You need a VPN or a RAS server. VPN is really the way to do it. RAS is old
school.
I would recommend a Cisco 3000 Series VPN concentrator. You can set it up
in
your sleep.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]
Sent: Friday, March 15, 2002 12:08 AM
To: NT 2000 Discussions
Subject: Connecting Remotely to the network
Ok ppl i am seriously clueless i have done searched and looked at
microsoft.com and there just seem like so many options and I am confused
We have a small network here of about 10 ppl, some of these ppl are away
alot and need to log onto the network remotely, any guidelines as to how i
should go about setting this up?
thanks
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to %%email.unsub%%
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to %%email.unsub%%
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to %%email.unsub%%
------
You are subscribed as [EMAIL PROTECTED]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to %%email.unsub%%
------
You are subscribed as [email protected]
Archives: http://www.swynk.com/sitesearch/search.asp
To unsubscribe send a blank email to [EMAIL PROTECTED]
