I don't know what brand you're implementing, but these links provide some info:
http://www.cisco.com/warp/public/473/3.html http://www.cisco.com/warp/public/473/46.html The only instance that I've ever used auto sensing is with some old Sparc boxen. John Allhiser CCNP MCSE Network Engineer Business Men's Assurance -----Original Message----- From: Elkins.Justin [mailto:[EMAIL PROTECTED]] Sent: Tuesday, April 02, 2002 3:25 PM To: NT 2000 Discussions Subject: Switch port settings I know this was discussed a few months back but have had no luck finding anything about it in the archive. Sorry if this is redundant. We have a large implementation rolling out on several machines in several different locations using several different NIC's and OS's . The problem is this, one group wants to set all devices to be set to use auto-sensing and all the ports on the switches to auto-sensing. My group thinks this is a bad idea but we can't seem to find any ammunition to support our case. Is there some kind of official standard or something. In our primary network we seem to have problems constantly if the PC's are set to auto. These machines will be very mission critical handling millions of dollars worth of transactions. In our primary network we seem to have problems constantly if the PC's are set to auto-sensing. ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
