Is the subnet mask correct? Verify that all NICs/switch ports are NOT set to Auto-Negotiate - hard set to 100/Full or 100/Half. Can you ping 127.0.0.1 or the gateway? Remove/Reinstall NIC drivers? Any firewalls anywhere? Is the MS Proxy client installed? Swap the patch cable? Any eventvwr messages?
HTH, Devin L. Meade, CNE, MCP Network Administrator Frankfurt-Short-Bruza www.fsb-ae.com -----Original Message----- From: Barr, Christopher [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 19, 2002 1:34 PM To: NT 2000 Discussions Subject: Problem with 2K server just set up... I have an issue that I can't seem to figure out. I have 1 specific server that this server cannot communicate with, whats weird is that if I do a net view, or go through and browse the Network Neighborhood, it's there. But cannot access the server at all, not even a ping. All other servers in the domain are fine, it's just this one. I am attempting to install DHCP, and Wins but both fail to connect to that one other specific server (which happens to be the DHCP and WINS server). I did notice that WINS seemed to be trying to connect to a REMOTE system over the router to replicate with, but I didn't intend to nor want it to be set up that way. It's supposed to just replicate with the local machine. Any suggestion or comments would be appreciated. ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
