we have 2 T's coming in that we are going to bundle together for our Frame Relay network,and I was just looking for suggestions on what WIC card to purchase
-----Original Message----- From: George G. Stossel (.net) [mailto:stossel@;dacor.net] Sent: Friday, November 15, 2002 10:41 AM To: NT 2000 Discussions Subject: RE: off topic WIC card Depends on what you are doing. If you plan to have 2 T1's and use Cisco CEF to load balance, then you can use a WIC 2 with standalone CSU/DSU's or use 2 WIC's with intergraded CSU/DSU's. If the Telco plans to give you 2 ATM T1's and you use AIM to bundle the bandwidth, then you are going to need a 4 T1 port ATM card. I'm now aware of a WIC that supports more than a 1.5MB T1. George G. Stossel DACOR, Inc. www.dacor.net -----Original Message----- From: [EMAIL PROTECTED] [mailto:bounce-nt2000-256980@;ls.swynk.com]On Behalf Of Luke Levis Sent: Friday, November 15, 2002 10:12 AM To: NT 2000 Discussions Subject: off topic WIC card i'm looking for a WIC card for a cisco 2600 series router, but it needs to be able to support 3 MBits, and I'm not quite sure of the terminology.. would I be looking for a WIC 2 card sorry for the dumb question *************************************************************************** The information contained in this message is intended only for the confidential use of the recipient(s) named above. This message is privileged and confidential. If the reader of this message is not the intended recipient or any agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately. SMG reserves the right to monitor and review all content sent to and from this email address. Messages sent to and from this address may be stored on the SMG email system. ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to %%email.unsub%% *************************************************************************** The information contained in this message is intended only for the confidential use of the recipient(s) named above. This message is privileged and confidential. If the reader of this message is not the intended recipient or any agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately. SMG reserves the right to monitor and review all content sent to and from this email address. Messages sent to and from this address may be stored on the SMG email system. ------ You are subscribed as [email protected] Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe send a blank email to [EMAIL PROTECTED]
