What are you using for name resolution? Aaron
-----Original Message----- From: Robert Saylors [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 10, 2003 11:47 AM To: NT 2000 Discussions Subject: NT logon problems I tried getting help earlier - but needed more info. Here it is I have included as much info as I can remember - please fell free to ask for additional info if required to help Thanks everyone. Server: Windows NT 4.0 SP 6 Stations: Win98 SE Problem: when any user tries to logon they get the error message "The domain password you supplied is not correct, or access to your logon server has been denied". This happens to all users - if you acknowledge the error and retry - you will logon. It use to require multiple tries - but after replacing the TCP/IP in the stations - it only gives you 1 error. I have tried different ports on the switch - different IP - different (new) user - no change. I have restarted my authentication server (PDC) and BDC server as well. I cannot find a reason this is happening nothing was added or removed from server or stations). I have tried the suggestions I have found on the KB and searching (create new station ID, add another protocol) but still nothing. And to make matters worse - I have 1 station in shipping that will not logon at all - same error over and over. If I uncheck logon to Windows NT domain and have it logon to a workgroup - it works fine and will map all the drives to the Windows NT servers as required. Thank you, Robert Saylors Technical Services Manager FoxBerry Incorporated ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=e nglish To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=english To unsubscribe send a blank email to [EMAIL PROTECTED]
