I believe the ISP will give you the AN for BGP. -----Original Message----- From: Luke Levis [mailto:[EMAIL PROTECTED] Sent: Friday, June 13, 2003 7:05 AM To: NT 2000 Discussions Subject: RE: off topic - routing
well I stared at the config until hyperterminal actually started talking to me.. so I sucked it up and called Sprint and they had forgot to add routing for the class C they gave me through that s0 interface, and within seconds it was up and running.... guess I should have called them first.... on another note I'm looking into getting a BGP number is that something I get from an ISP or do I have to go through someone like network solutions? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 11, 2003 9:39 PM To: NT 2000 Discussions Subject: Re: off topic - routing Luke, You've seen the ISP default route issue, so I won't cover that here. You got the subnet mask thing too I see. Do a 'show ip route' and email it to me. 2nd. Do an extended ping. just type 'ping' You want extended commands 'y' source will be the IP address of e0 See if that goes, email the results. Is this a new install or was it working for the longest time... For safety, send a 'show interface' . The ISP gave you the usable range of 208.4.66.0-255 or 144.232.255.26 Let's go from there. -James At 12:59 6/11/2003, Luke Levis wrote: >been racking my brain here and can't seem to figure out what I have >missed... > >I have a cisco 2524 with 1 serial interface and one ethernet interface, and >like I have always done I plugged the t-1 into the serial interface and >plug the ethernet interface into a hub and hung a laptop off the hub.. I >gave the serial interface the assigned IP that my ISP gave me and gave the >ethernet interface one of the adresses in my class C that my ISP gave me and >gave the laptop an address in that class C range and set it's gateway to the >ethernet interface.... now from the router I can traceroute, ping, etc. to >my heart's content and get anywhere I want, and from the laptop I can get to >ethernet interface on the router but no further.. I put in my default route >as >ip route 0.0.0.0 0.0.0.0 s0 and even put in a specific route for the class c >space, but the laptop cannot get past the E0 interface here is the >interface and route config: > >interface Ethernet0 > ip address 208.4.66.1 255.255.254.0 >! >interface Serial0 > ip address 144.232.255.26 255.255.255.128 >! >ip classless >ip route 0.0.0.0 0.0.0.0 Serial0 >ip route 208.4.66.0 255.255.254.0 Serial0 > >the laptops address is 208.4.66.10 subnet 255.255.254.0 gateway 208.4.66.1 >and I can ping the laptop from the router > >any help is appreciated, sorry for the off-topic >*************************************************************************** >The information contained in this message is intended only for the >confidential use of the recipient(s) named above. This message is privileged >and confidential. If the reader of this message is not the intended >recipient or any agent responsible for delivering it to the intended >recipient, you are hereby notified that you have received this document in >error and that any review, dissemination, distribution, or copying of this >message is strictly prohibited. If you have received this communication in >error, please notify us immediately. SMG reserves the right to monitor and >review all content sent to and from this email address. Messages sent to and >from this address may be stored on the SMG email system. ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=e nglish To unsubscribe send a blank email to %%email.unsub%% *************************************************************************** The information contained in this message is intended only for the confidential use of the recipient(s) named above. This message is privileged and confidential. If the reader of this message is not the intended recipient or any agent responsible for delivering it to the intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this communication in error, please notify us immediately. SMG reserves the right to monitor and review all content sent to and from this email address. Messages sent to and from this address may be stored on the SMG email system. ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=e nglish To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=english To unsubscribe send a blank email to [EMAIL PROTECTED]
