You said you can see the network but can you access the network. Maybe if you are running NetBEUI and it is showing the nodes but you have no access to them.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 01, 2003 9:14 AM To: NT 2000 Discussions Subject: RE: Help again VS 2 (primary domain missing) You might have a switch and the port might be set up for spanning tree. Have you network admin turn the ports to portfast or enable portfast Your environment might not need spanning tree (simple network) so then disable it on all switches. Spanning tree turns the port off for 30 seconds and often with newer machines the login prompt comes just w/in that window. try letting a machine sit at the login prompt for 2 minutes and then login. see if that works. if it does, chances are, it's spanning-tree Using PortFast and Other Commands to Fix Workstation Startup Connectivity Delays http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note0918 6a00800b1500.shtml http://www.cisco.com/warp/public/473/51.html At 03:29 7/1/2003, you wrote: >nope i even tried pluggin in a new cable from the wall into my pc, no >avail, besides that how come i can see the network when i log in with the >admin password? > > > > > "Freddie > Soerensen" > > <[EMAIL PROTECTED] To: "NT 2000 > Discussions" <[EMAIL PROTECTED]> > res.com> cc: > > Sent by: Subject: RE: Help > again VS 2 (primary domain missing) > [EMAIL PROTECTED] > > .swynk.com > > > > > > 2003/07/01 10:21 > AM > > Please respond to > "NT > > 2000 > Discussions" > > > > > > > > > >Vanessa > >Maybe the cable is unplugged on your pc this time ? > >Freddie > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] > > Sent: Dienstag, 1. Juli 2003 10:18 > > To: NT 2000 Discussions > > > > > > I have been off sick for a week and i have come back to the > > same problem that i had last week, don't know if any of you > > remember the problem i had logging on to the network from my > > pc, last time a cable was out the hub but this time this is > > not that case. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > When i try to log on to my pc on to the network i get the > > message primary > > domain control missing or invalid username/password or > > something, when i > > log on to the local pc with the admin password i can get in > > fine and i can > > see the network, i have removed and added the computer to > > the domain, > > rebooted, still doesn't seem to make any difference, can > > anyone help? > > > > > > tia > > > > vee > > > > > > > > > > > > > > > > > > ------ > > You are subscribed as [EMAIL PROTECTED] Web Interface: > > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&tex > > t_mode=&lang=english > > To unsubscribe send a blank email to %%email.unsub%% > > > >------ >You are subscribed as [EMAIL PROTECTED] >Web Interface: >http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode >=&lang=english >To unsubscribe send a blank email to %%email.unsub%% > > > > > >------ >You are subscribed as [EMAIL PROTECTED] >Web Interface: >http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang= english >To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=e nglish To unsubscribe send a blank email to %%email.unsub%% ------ You are subscribed as [EMAIL PROTECTED] Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=nt2000&text_mode=&lang=english To unsubscribe send a blank email to [EMAIL PROTECTED]
