Dear Sir,

On Thu, Sep 19, 2002 at 06:49:50AM -0500, Burton M. Strauss III wrote:
> (I changed the subject to something meaningful... Bad user, no biscuit)
> 

Quite right. ( <inanity> perhaps you would like 'A walk across America'
by Peter Jenkins </inanity>

> Without something from the child, it's going to be near impossible to figure
> out.
> 
> My siginfo.h has this (but it's Linux):
> 
> /*
>  * SIGBUS si_codes
>  */
> #define BUS_ADRALN      (__SI_FAULT|1)  /* invalid address alignment */
> #define BUS_ADRERR      (__SI_FAULT|2)  /* non-existant physical address */
> #define BUS_OBJERR      (__SI_FAULT|3)  /* object specific hardware error */
> #define NSIGBUS         3
> 
> 
> So -- two ways to do this (I've not tried either, but they should work):
> 
> 1. Try running with -K -- that should enable the automatic backtrack, if
> possible.
> 
> (Check config.h:
> 
>            config.h:    90   /* Define if you have backtrace */
>            config.h:    91   #define HAVE_BACKTRACE 1
> 
> You may need to add SIGBUS to the code in initialize.c:
> 
> #ifndef WIN32
>   /* Setup signal handlers */
>   setsignal(SIGTERM, cleanup);
>   setsignal(SIGINT,  cleanup);
>   setsignal(SIGHUP,  handleSigHup);
>   setsignal(SIGPIPE, ignoreThisSignal);
>   setsignal(SIGABRT, ignoreThisSignal);
>   if(myGlobals.debugMode) {
>     /* Activate backtrace trap on -K flag */
>     setsignal(SIGSEGV, cleanup);
>   }
> #endif
> 
> e.g.
> 
>   if(myGlobals.debugMode) {
>     /* Activate backtrace trap on -K flag */
>     setsignal(SIGSEGV, cleanup);
>     setsignal(SIGBUS, cleanup);
> }
> 
> And again in ntop.c:
> 
>   if (signo == SIGSEGV) {
> 
> e.g.
> 
>   if ( (signo == SIGSEGV) || (signo == SIGBUG) ) {
> 
> 

Done almost as specified but won't build: can't find backtrace 
backtrace_symbola

pc09011> diff -u config.h config.h.dist 
--- config.h    Fri Sep 20 12:00:05 2002
+++ config.h.dist       Fri Sep 20 11:55:26 2002
@@ -89,7 +89,6 @@
 
 /* Define if you have backtrace */
 /* #undef HAVE_BACKTRACE */
-#define HAVE_BACKTRACE 1
 
 /* Defines for endian-ness... */
 #define NTOP_LITTLE_ENDIAN 1

pc09011> diff -u ntop.c ntop.c.dist 
--- ntop.c      Fri Sep 20 12:03:10 2002
+++ ntop.c.dist Fri Sep 20 11:57:15 2002
@@ -755,7 +755,7 @@
   }
 
 #ifdef HAVE_BACKTRACE
-  if ( (signo == SIGSEGV) || (signo == SIGBUS) ) {
+  if (signo == SIGSEGV) {
     void *array[20];
     size_t size;
     char **strings;

pc09011> diff -u initialize.c initialize.c.dist 
--- initialize.c        Fri Sep 20 11:56:57 2002
+++ initialize.c.dist   Fri Sep 20 11:56:09 2002
@@ -1270,7 +1270,6 @@
   if(myGlobals.debugMode) { 
     /* Activate backtrace trap on -K flag */
     setsignal(SIGSEGV, cleanup);
-    setsignal(SIGBUS, cleanup);
   }
 #endif
 }
pc09011> 



gcc -shared  emitter.lo globals-report.lo graph.lo http.lo report.lo 
reportUtils.lo webInterface.lo  -lcrypt -lm -lz 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/gd-1.8.3 -lgd 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/gd-1.8.3/libpng-1.2.1 
-lpng -L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/zlib-1.1.4 
-lz -lc_r -lcrypt -lm -lz -lgd -lpng -lz  -Wl,-soname 
-Wl,libntopreport-2.1.so.2 -o .libs/libntopreport-2.1.so.2
(cd .libs && rm -f libntopreport-2.1.so && ln -s libntopreport-2.1.so.2 
libntopreport-2.1.so)
(cd .libs && rm -f libntopreport.so && ln -s libntopreport-2.1.so.2 
libntopreport.so)
ar cru .libs/libntopreport.a  emitter.o globals-report.o graph.o http.o 
report.o reportUtils.o webInterface.o 
ranlib .libs/libntopreport.a
creating libntopreport.la
(cd .libs && rm -f libntopreport.la && ln -s ../libntopreport.la 
libntopreport.la)
gcc -DHAVE_CONFIG_H -I. -I/usr/local/include 
-I/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c 
-I/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/zlib-1.1.4    -g 
-O2 -pipe -c main.c
gcc -DHAVE_CONFIG_H -I. -I/usr/local/include 
-I/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c 
-I/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/zlib-1.1.4    -g 
-O2 -pipe -c admin.c
/bin/sh ./libtool --mode=link gcc  -g -O2 -pipe  -o ntop  main.o admin.o 
libntopreport.la libntop.la -lc_r   -lcrypt -lm -lz 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c -lgdchart 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/gd-1.8.3 -lgd 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/gd-1.8.3/libpng-1.2.1 
-lpng -L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/zlib-1.1.4 
-lz
gcc -g -O2 -pipe -o .libs/ntop main.o admin.o  ./.libs/libntopreport.so 
-lcrypt -lm -lz -L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c 
-lgdchart -L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/gd-1.8.3 
-lgd 
-L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/gd-1.8.3/libpng-1.2.1 
-lpng -L/usr/home/anwsmh/build/ntop-2.0.99-rc1/gdchart0.94c/zlib-1.1.4 
-lz -lcrypt -lm -lz -lgdchart -lgd -lpng -lz ./.libs/libntop.so -lpcap 
-L/usr/local/lib -lgdbm -lcrypt -lm -lz -lgdchart -lgd -lpng -lz -lc_r 
-lcrypt -lm -lz -lgdchart -lgd -lpng -lz -Wl,--rpath 
-Wl,/usr/local/ntop-2.1.2/lib
/usr/lib/libc.so: WARNING!  setkey(3) not present in the system!
/usr/lib/libc.so: warning: this program uses gets(), which is unsafe.
/usr/lib/libc.so: warning: mktemp() possibly used unsafely; consider 
using mkstemp()
/usr/lib/libc.so: WARNING!  des_setkey(3) not present in the system!
/usr/lib/libc.so: WARNING!  encrypt(3) not present in the system!
/usr/lib/libc.so: warning: tmpnam() possibly used unsafely; consider 
using mkstemp()
/usr/lib/libc.so: warning: this program uses f_prealloc(), which is not 
recommended.
/usr/lib/libc.so: WARNING!  des_cipher(3) not present in the system!
/usr/lib/libc.so: warning: tempnam() possibly used unsafely; consider 
using mkstemp()
/usr/libexec/elf/ld: warning: libpng.so.5, needed by 
/usr/local/lib/libgd.so.2, may conflict with libpng.so.3
../.libs/libntop.so: undefined reference to `backtrace_symbols'
../.libs/libntop.so: undefined reference to `backtrace'
gmake[2]: *** [ntop] Error 1
gmake[2]: Leaving directory `/usr/home/anwsmh/build/ntop-2.1.2/ntop'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/home/anwsmh/build/ntop-2.1.2/ntop'
gmake: *** [all-recursive-am] Error 2
pc09011>

The same result follows gmake clean; gmake.

> Option 2.
> 
> Comment out the definition of FORK_CHILD_PROCESS in ntop.h.  This should
> stop ntop from forking to handle the "read only" URL.
> 
> Then run under gdb (instructions are at http://snapshot.ntop.org)
> 
> 
> 
> If it works (i.e. still fails the same way), #2 will give better info.
> 
> 
> -----Burton
>


Option 2.

Grrr. It works flawlessly on my test build.

Will try on problem host(s).

Thank you,

Yours sincerely.

 

-- 
------------------------------------------------------------------------
Stanley Hopcroft
------------------------------------------------------------------------

'...No man is an island, entire of itself; every man is a piece of the
continent, a part of the main. If a clod be washed away by the sea,
Europe is the less, as well as if a promontory were, as well as if a
manor of thy friend's or of thine own were. Any man's death diminishes
me, because I am involved in mankind; and therefore never send to know
for whom the bell tolls; it tolls for thee...'

from Meditation 17, J Donne.
_______________________________________________
Ntop-dev mailing list
[EMAIL PROTECTED]
http://lists.ntop.org/mailman/listinfo/ntop-dev

Reply via email to