Finally got around to installing this patch. It works as advertised. I like it.
My only other suggestion would be a note placed between the title and table stating something like, "toggle items in the Active column to change plugin state". Tim -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Burton Strauss Sent: Tuesday, September 09, 2003 11:09 PM To: [EMAIL PROTECTED] Subject: RE: [Ntop-dev] Plugins - unable to select some BTW, if you READ the text on each line, it says whether it's a CONFIGURE or VIEW type plugin... This plugin is used to setup, activate and deactivate ntop's rrd support. This plugin is used to setup, activate and deactivate ntop's sFlow support. This plugin produces a minimal ntop report, suitable for display on a pda. etc. Still, it's possible to split the columns - try the attached patch. -----Burton ---------- Original Message ---------------------------------- From: "Burton Strauss" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Tue, 9 Sep 2003 19:31:30 -0700 >"unless it's one that allows for inactive configuration" > >-----Burton > >---------- Original Message ---------------------------------- >From: "pc" <[EMAIL PROTECTED]> >Reply-To: [EMAIL PROTECTED] >Date: Tue, 9 Sep 2003 22:16:21 -0400 > >>Hot damn! Selecting items in the active column works (turned a couple on). >>But now the next thing... I seem to have two items (sFlow and NetFlow) that >>say 'no' in the active column that also have hyperlinks in the Name column. >>Maybe this is why they were not intuitive. Maybe I'm just confused. I have >>not ever turned them on either. I also looked at my log file and these two >>plugins were not 'started' although all plugins were 'loaded'. >> >>Tim >>> -----Original Message----- >>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>> Sent: Tuesday, September 09, 2003 5:15 PM >>> To: [EMAIL PROTECTED] >>> Subject: RE: [Ntop-dev] Plugins - unable to select some >>> >>> It's got to be something with your install - they're working fine for me. >>> >>> >>> Now, remember: the left side (Name) link is only active if the plugin is >>> active (the right side, 'Active' link), unless it's one that allows for >>> inactive configuration.... could that be it? >>> >>> -----Burton >>> >>> >>> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>> Sent: Tuesday, September 09, 2003 2:25 PM >>> To: [EMAIL PROTECTED] >>> Subject: [Ntop-dev] Plugins - unable to select some >>> >>> All of the plugins compile and all the plugin .so files install into the >>> plugin directory. When you view the plugins from the Admin/Plugins web >>> page the following plugins do NOT have hyperlinks associated with them and >>> are not active: >>> PDAPlugin nfsWatch LastSeen icmpWatch >>> The other plugins have the normal hyperlinks and their active state can be >>> changed in the normal way. >>> >>> This behavior is with 2.2.94 cvs. With the 2.2.93 rpm distribution I see >>> the same behavior with the PDAPlugin and nfsWatch plugins (the LastSeen >>> and icmpWatch plugins work normally with 2.2.93). My previous assumption >>> was that the PDAPlugin and nfsWatch plugins were not available for >>> selection where nfs and PDA associated functions are not in use on this >>> box. I guess that this assumption was probably wrong where I certainly >>> have icmp traffic. >>> >>> If you need a bug dump let me know. >>> >>> Tim >> >> > > >____________________________________________________________ >Free 20MB Web Site Hosting and Personalized E-mail Service! >Get It Now At Doteasy.com http://www.doteasy.com/et/ >_______________________________________________ >Ntop-dev mailing list >[EMAIL PROTECTED] >http://listgateway.unipi.it/mailman/listinfo/ntop-dev > _______________________________________________ Ntop-dev mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop-dev
