Hello Arianna, I use version 1.2.2 r8591, pulled from svn
Here's my output: ~/ntopng# ./ntopng -i eth1 -i eth2 --dont-change-user 03/Dec/2014 12:29:50 [Ntop.cpp:683] Setting local networks to 192.168.1.0/24,0.0.0.0/32,224.0.0.0/8,239.0.0.0/8,255.255.255.255/32,127.0.0.0/8 03/Dec/2014 12:29:50 [Redis.cpp:84] Successfully connected to Redis 127.0.0.1:6379 03/Dec/2014 12:29:50 [Redis.cpp:139] ERROR: ERR unknown command 'HGET' 03/Dec/2014 12:29:50 [Redis.cpp:139] ERROR: ERR unknown command 'HGET' 03/Dec/2014 12:29:50 [Redis.cpp:139] ERROR: ERR unknown command 'HGET' 03/Dec/2014 12:29:50 [PcapInterface.cpp:81] Reading packets from interface eth2... 03/Dec/2014 12:29:50 [Ntop.cpp:807] Registered interface eth2 [id: 0] 03/Dec/2014 12:29:50 [main.cpp:183] PID stored in file /var/tmp/ntopng.pid 03/Dec/2014 12:29:50 [HTTPserver.cpp:385] HTTPS Disabled: missing SSL certificate /root/ntopng/httpdocs/ssl/ntopng-cert.pem 03/Dec/2014 12:29:50 [HTTPserver.cpp:387] Please read https://svn.ntop.org/svn/ntop/trunk/ntopng/README.SSL if you want to enable SSL. 03/Dec/2014 12:29:50 [HTTPserver.cpp:432] Web server dirs [/root/ntopng/httpdocs][/root/ntopng/scripts] 03/Dec/2014 12:29:50 [HTTPserver.cpp:435] HTTP server listening on port 3000 03/Dec/2014 12:29:50 [main.cpp:231] Working directory: /var/tmp/ntopng 03/Dec/2014 12:29:50 [main.cpp:233] Scripts/HTML pages directory: /root/ntopng 03/Dec/2014 12:29:50 [Ntop.cpp:218] Welcome to ntopng i686 v.1.2.2 (r8591) - (C) 1998-14 ntop.org 03/Dec/2014 12:29:50 [PeriodicActivities.cpp:53] Started periodic activities loop... 03/Dec/2014 12:29:50 [RuntimePrefs.cpp:32] Dump alerts into syslog 03/Dec/2014 12:29:50 [NetworkInterface.cpp:842] Started packet polling on interface eth2 [id: 0]... ^C03/Dec/2014 12:29:54 [main.cpp:37] Shutting down... 03/Dec/2014 12:29:54 [PcapInterface.cpp:168] Terminated packet polling for eth2 03/Dec/2014 12:29:56 [ProtoStats.cpp:35] [IPv4] 699.23 KB/1.61 K Packets 03/Dec/2014 12:29:56 [ProtoStats.cpp:35] [IPv6] 305 B/2.00 Packets 03/Dec/2014 12:29:56 [ProtoStats.cpp:35] [ARP] 60 B/1.00 Packets 03/Dec/2014 12:29:56 [ProtoStats.cpp:35] [MPLS] 0 B/0.00 Packets 03/Dec/2014 12:29:56 [ProtoStats.cpp:35] [Other] 60 B/1.00 Packets 03/Dec/2014 12:29:56 [Ntop.cpp:833] Interface eth2 [running: 0] 03/Dec/2014 12:29:56 [main.cpp:55] Deleted PID /var/tmp/ntopng.pid [rc: 0] 03/Dec/2014 12:29:56 [NetworkInterface.cpp:202] Flushing host contacts for interface eth2 03/Dec/2014 12:29:56 [NetworkInterface.cpp:868] Cleanup interface eth2 03/Dec/2014 12:29:56 [HTTPserver.cpp:448] HTTP server terminated 03/Dec/2014 12:29:56 [AddressResolution.cpp:223] Address resolution stats [0 resolved][1 failures] Network configuration: eth1 Link encap:Ethernet HWaddr 10:fe:ed:02:29:8b inet addr:81.82.214.104 Bcast:255.255.255.255 Mask:255.255.192.0 inet6 addr: fe80::12fe:edff:fe02:298b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:462734524 errors:0 dropped:0 overruns:0 frame:0 TX packets:335415823 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1593948126 (1.5 GB) TX bytes:3284914301 (3.2 GB) Interrupt:27 Base address:0xa000 eth2 Link encap:Ethernet HWaddr 00:11:43:7e:1d:c4 inet addr:192.168.111.248 Bcast:192.168.111.255 Mask:255.255.255.0 inet6 addr: fe80::211:43ff:fe7e:1dc4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2458631417 errors:0 dropped:0 overruns:0 frame:0 TX packets:978571489 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:205958636 (205.9 MB) TX bytes:3829343578 (3.8 GB) Interrupt:16 eth2:1 Link encap:Ethernet HWaddr 00:11:43:7e:1d:c4 inet addr:192.168.111.1 Bcast:192.168.111.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:16 Regards, Ruben Hello, Hi! > I'm trying ntopng out, but I don't manage to poll more then one interface > > The commands i tried : > ./ntopng -i eth1 -i eth2 -> only eth2 is monitored > ./ntopng --interface=eth1 --interface=eth2 -> only eth2 is monitored > ./ntopng --interface=eth1,eth2 -> ntopng tries to monitor > interface "eth1,eth2", which does not exist. > > What am I doing wrong? > > I seem to be able to monitor multiple interfaces by using the -i switch multiple times. E.g. # ./ntopng -i enp0s25 -i wlp3s0 <snip> 03/Dec/2014 09:55:49 [NetworkInterface.cpp:858] Started packet polling on interface enp0s25 [id: 3]... 03/Dec/2014 09:55:49 [NetworkInterface.cpp:858] Started packet polling on interface wlp3s0 [id: 8]... # ./ntopng -i enp0s25 -i lo -i wlp3s0 <snip> 03/Dec/2014 09:59:57 [NetworkInterface.cpp:858] Started packet polling on interface enp0s25 [id: 3]... 03/Dec/2014 09:59:57 [NetworkInterface.cpp:858] Started packet polling on interface lo [id: 4]... 03/Dec/2014 09:59:57 [NetworkInterface.cpp:858] Started packet polling on interface wlp3s0 [id: 8]... I am using ntopng v.1.2.2 (SVN r1.2.2). Which version are you using? Thanks, Arianna Kind regards, > Ruben De Baets > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop > -- /* * Arianna Avanzini * [email protected] * http://ava.webhop.me */ -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://listgateway.unipi.it/mailman/private/ntop/attachments/20141203/5a8e5eff/attachment-0001.htm> ------------------------------ _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop End of Ntop Digest, Vol 127, Issue 7 ************************************ _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
